Regalo 0530W Infant Bather User Guide
Quick guide for the Regalo 0530W Infant Bather, including assembly steps, safety warnings, usage limits, and maintenance instructions.
Table of contents
Quick guide from the manual
This document provides essential instructions for the safe assembly and use of the Regalo 0530W Infant Bather. It is critical to read all instructions before use to prevent serious injury or death. The product is designed for infants aged 0 to 3 months or up to 20 lbs (9 kg). Stop using the product immediately if the baby begins to sit up or reaches the weight limit.
Safety warnings
- Drowning Hazard: Always stay within arm's reach of your baby. Use only in an empty adult tub or sink with the drain open. Never rely on other children to supervise the infant.
- Fall Hazard: Use only on level surfaces. Never lift or carry the baby while they are in the bather.
- Water Safety: Test water temperature before placing the infant in the bather. Ideal water temperature is between 90°F and 100°F (32.2°C and 37.8°C). Use as little water as possible, as infants can drown in as little as 1 inch (2.5 cm) of water.
Assembly
- Extend the bather stand fully.
- Lock the bather in place by pushing the stand up. Repeat this step on the opposite side to ensure stability.
- Place the assembled bather on a level surface before use.
Care and maintenance
Periodically check the product for signs of damage, wear, or missing components. Do not use the product if any parts are damaged or missing. Clean the bather by wiping it with a damp cloth and mild soap. Towel or air dry. Do not use abrasive cleaners or bleach.
Warranty
The product includes a 90-day limited warranty for the original purchaser covering defects in materials or workmanship under normal, non-commercial use. Proof of purchase is required for claims.
Practical help
Common problems
Ensure the stand is fully extended and locked into position on both sides.
Discontinue use immediately if any parts are damaged, broken, or missing.
Before use
- Verify all parts are present (Bather unit).
- Ensure the surface where the bather will be placed is level.
- Test water temperature (must be between 90°F and 100°F).
- Check that the drain in the adult tub or sink is open.
- Confirm the infant is within the 0-3 month age range and under 20 lbs.
Specs in practice
- Age/Weight Limit
- 0-3 months or up to 20 lbs (9 kg); stop use if the baby starts sitting up.
- Water Temperature
- Maintain between 90°F and 100°F (32.2°C - 37.8°C).
Images and diagrams
- Step 1: Extend the stand.
- Step 2: Push the stand upward to lock it into the secure position.
- Step 3: Place on a flat, level surface.
Model compatibility
- Use only in an empty adult bathtub or sink.
- Never use on uneven surfaces.
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.