findmanualpdf.com

User Manual for Sabrent 10-Port Fast Charger AX-TU63

Quick guide for the Sabrent 10-Port Fast Charger (AX-TU63). Includes usage instructions, safety precautions, and technical specifications for simultaneous charging of up to 10 devices.

Table of contents

Quick guide from the manual

The Sabrent 10-Port Fast Charger is designed to charge up to 10 USB devices simultaneously. To use the device, follow these steps:

Sabrent 10-Port Fast Charger
Sabrent 10-Port Fast Charger
  1. Connect the USB cable of your device to the charger.
  2. Connect the power cable from the wall outlet to the charger (100-240V).
  3. Once the USB device is fully charged, disconnect the device and the charger from the power source.

Technical Specifications

The charger features voltage, current, temperature, and maximum charging time control. Key specifications include:

  • Input: 100-240Vac, 50/60Hz, 1.5A
  • Output: 10 x USB 5V 12A Max (each port supports up to 3A Max)
  • Dimensions: 95 x 55 x 45 mm

Safety Precautions

To ensure safe operation and prevent damage to the device or connected electronics, observe the following warnings:

  • Do not allow the fast charger to come into contact with water.
  • Do not expose or place the fast charger near heat sources or flammable materials.
  • Keep the charger out of reach of children.

Contact Information

For further assistance or inquiries, you can contact Sabrent support via the following channels:

Email: [email protected]: sabrent.com

Official resources from the manual

Official resource sabrent.com

Manufacturer information

Sabrent

Brand profile
Manufacturer website https://sabrent.com Support https://sabrent.com/support Manufacturer manuals https://sabrent.com/downloads

Practical help

Common problems

Device not charging

Ensure the power cable is securely connected to the wall outlet and the USB cable is properly inserted into the charger.

Before use

  • Verify the wall outlet provides 100-240Vac power.
  • Ensure the USB cables are compatible with your devices.
  • Check that the charger is placed on a stable, non-flammable surface.
  • Confirm the environment is dry and away from heat sources.

Manual page author

Emily Carter

User documentation editor

Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.