Sanela SLZN 09W Toilet Paper Holder
Quick guide for the Sanela SLZN 09W stainless steel toilet paper holder. Learn about installation methods, including drilling or adhesive mounting, and technical specifications.
Table of contents
Quick guide from the manual
This document provides technical specifications and installation instructions for the Sanela SLZN 09W stainless steel toilet paper holder. The product supports multiple installation methods, including non-invasive adhesive mounting and traditional drilling.
Product description
The Sanela SLZN 09W is a stainless steel toilet paper holder featuring a white matte finish. It is designed for bathroom environments.
Technical specifications
- Dimensions: 135 x 134 x 45 mm
- Weight: 0.32 kg
Installation methods
The holder can be installed using one of the following methods:
- 3M VHB Tape: Allows for installation without drilling.
- 3M VHB Tape with 3M Primer: Recommended for higher loads to ensure perfect fixation. The primer (SLA 59) increases the adhesion of the 3M VHB tape.
- Mounting Kit: Traditional installation using the included mounting set.
Manufacturer information
SANELA spol. s r. o.
Practical help
Common problems
Ensure the surface is clean and dry. For higher loads, use the SLA 59 3M Primer to increase adhesion.
Before use
- Clean the mounting surface thoroughly before applying adhesive.
- Verify the wall material is suitable for the chosen installation method.
- Use 3M Primer (SLA 59) if the holder will be subject to higher loads.
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.