Saxby Guard 100W LED Floodlight with PIR Sensor
Quick guide for the Saxby Guard 100W LED Floodlight (108601). Includes technical specifications, PIR sensor settings, and product features.
Table of contents
Quick guide from the manual
The Saxby Guard 100W LED Floodlight is an outdoor lighting solution featuring a built-in manual override PIR sensor. This document provides the technical specifications and key features for model 108601.
Product Features
- Manual Override PIR: Includes a built-in sensor with adjustable settings.
- Detection Range: 120-degree angle, 2-10 meters maximum range.
- Timer Function: Adjustable from 10±3 seconds to 7±3 minutes.
- Durability: IP65 rated (dust-tight and water-jet protected) and IK08 impact resistance.
- Design: Matt black finish with clear glass, anti-glare design, and angled mounting bracket.
Technical Specifications
- Wattage: 100W
- Lumen Output: 9000 lm
- Color Temperature: 4000K
- Voltage: 220-240V, 50/60Hz
- Operating Temperature: -20°C to 50°C
- Lifetime: 35,000 hours
- Weight: 1.093 kg
Contact Information
Saxby Lighting, Cabot Lane, Creekmoor, Poole, Dorset, BH17 7BY. Phone: (+44) 033 00 555 885. Email: [email protected]. Website: www.saxbylighting.com
Official resources from the manual
Practical help
Common problems
Check if the PIR sensor is obstructed or if the ambient light level is above the lux setting.
Check if the manual override is active or if the timer setting is set to the maximum duration.
Before use
- Verify the installation surface can support the weight (1.093kg)
- Ensure the power supply is 220-240V
- Confirm the mounting location is suitable for IP65 rating
- Check that the PIR sensor is positioned to cover the desired detection area
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.