End of Life Instructions for Schneider Electric QO Miniature Circuit Breaker
Quick guide to the end-of-life instructions for the Schneider Electric QO Miniature Circuit Breaker. Includes recycling recommendations, product specifications, and disposal guidelines for recyclers.
Table of contents
Manual images
Click an image to enlargeImportant information
This document provides end-of-life instructions for the Schneider Electric QO Miniature Circuit Breaker. It is intended for use by end-of-life recyclers or treatment facilities to ensure appropriate handling of components and materials. The product must be disposed of according to the legislation of the country where it is used.
Product description
The QO Miniature Circuit Breaker (Reference: QO120PAFGF) is designed for the protection of low voltage electrical installations. Key specifications include:
- Total representative product mass: 158.4 g
- Representative product dimensions: 70 mm x 102 mm x 18 mm
- Recyclability potential: 29% (based on the ECO'DEEE recyclability and recoverability calculation method)
End of life treatment
The product contains components that require specific attention during the recycling process:
- Electronic Board (Communication): The board area is greater than 10 cm² (specifically 27 cm²) and must be depolluted.
No special transportation is required for this product.
Contact information
For further assistance, contact the Schneider Electric Country Customer Care Center via their website at http://www.schneider-electric.com/contact.
Official resources from the manual
Manufacturer information
Schneider Electric
Practical help
Before use
- Ensure the device is fully disconnected from the electrical installation before handling.
- Consult local environmental legislation regarding the disposal of electrical components.
- Identify the specific model reference (QO120PAFGF) to confirm recycling requirements.
Specs in practice
- Recyclability potential
- 29% of the product can be recovered based on the ECO'DEEE method.
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.