User Guide for SIIG 04-1054B Serial and Parallel PCIe Card
Quick start guide for the SIIG 04-1054B PCIe card. Includes system requirements, driver installation steps, and technical specifications for serial and parallel port connectivity.
Table of contents
Quick guide from the manual
This guide provides essential information for the installation and setup of the SIIG Serial/Parallel PCIe card. Before beginning, ensure your computer has an available PCIe slot and that your operating system is compatible with the device.
Features
- Bus connector: PCI Express x1
- Compliance: PCI Express 1.1
- Serial port baud rate: Up to 115.2 Kbps
- Serial port FIFO: 256 Bytes
- Serial port UART: 16C550
System Requirements
The card is compatible with the following operating systems:
- Windows: 11, 10, 8.1, 7 (32/64-bit)
- Windows Server: 2019, 2016, 2012 R2, 2012, 2008 R2, 2008, 2003 (32/64-bit)
- Linux: Kernel 2.6 and later versions
- Hardware: An available PCIe slot
Driver Installation
Before installing drivers, check if your operating system automatically recognizes the card. If the system has a built-in driver, you may be able to use the card directly without further installation.
- If the card is not recognized, visit the official SIIG website.
- Use your specific product number (e.g., LB-xxxxxx-S1) to locate and download the appropriate driver.
- Run the Setup.exe file to begin the installation.
- Follow the on-screen prompts to complete the driver setup.
Support
For additional information or technical assistance, please visit the official support page at http://www.siig.com/support.
Official resources from the manual
Manufacturer information
SIIG, Inc.
Practical help
Common problems
Verify that the card is securely seated in the PCIe slot and check if the OS has a built-in driver that can be used directly.
Ensure you are using the correct product number (e.g., LB-P00014-S1) when searching for drivers on the SIIG website.
Before use
- Verify that your motherboard has an available PCIe slot.
- Confirm your operating system is supported (Windows 7/8.1/10/11, Server 2003-2019, or Linux kernel 2.6+).
- Identify the specific model number of your card (e.g., LB-S00114-S1) for driver downloads.
- Check if the OS can use the card with built-in drivers before downloading external software.
Manual page author
David Miller
Documentation analyst
Organizes user manual content into clear summaries, with attention to model details, product context, and everyday usability.