Silverstone 12VHPWR/12V-2x6 Connector Cable Routing Instructions
Essential installation guidelines for Silverstone 12VHPWR/12V-2x6 connectors. Learn the critical cable bending requirements to prevent damage and ensure safe power delivery.
Table of contents
Manual images
Click an image to enlargeImportant Installation Notice
The 12VHPWR/12V-2x6 connector utilizes a high-density design. To ensure safe operation and prevent potential damage, overheating, or connection failure, you must strictly adhere to the cable routing guidelines provided in this document.
Cable Bending Guidelines
If cable bending is required for cable management, you must leave a sufficient length of straight cable extending from the connector housing before applying any bend.
- Minimum Straight Length: 35mm (1.38 inches).
- Requirement: The cable must remain straight for at least 35mm from the connector housing.
- Restriction: Do not bend the cable within the 35mm zone immediately adjacent to the connector housing.
Safety Precautions
Bending the cable too close to the connector housing can compromise the integrity of the high-density pins. Always ensure that your cable management solution allows for the required 35mm of straight clearance to maintain optimal power delivery and safety.
Manufacturer information
SilverStone Technology Co., Ltd.
Practical help
Common problems
Ensure the cable remains straight for at least 35mm from the connector housing before applying any bend.
Verify that the cable is not under tension or bent too sharply near the connector housing.
Before use
- Measure the distance from the connector housing to the first bend.
- Ensure the cable is straight for at least 35mm (1.38 inches).
- Check that the cable management does not force a bend within the 35mm zone.
- Verify the connector is fully seated in the port.
Manual page author
Michael Turner
Technical manual editor
Reviews PDF manuals for structure, safety notes, and practical product details so readers can find the right information quickly.