Lighting / Decorative Lighting
User Guide for Solight 1V110-M-1 Christmas Lights
Quick guide for Solight 1V110-M-1, 1V110-W-1, and 1V110-WW-1 Christmas lights. Learn how to operate lighting modes, use the timer function, and follow safety guidelines for indoor and outdoor use.
Quick answers from the manual
Quick answer
- To activate the timer, perform a long press on the button on the power adapter. The lights will stay on for 6 hours and off for 18 hours in a repeating cycle. p. 1
Key actions
- Fully unwind the lights before plugging them in to prevent overheating. p. 1
First start
- Unpack the lights, unwind them completely, and connect to the power supply using the provided adapter. p. 1
Problems and fixes
Damaged cable or short circuit
Do not use the lights if they are damaged in any way.
p. 1Maintenance and reset
- Clean with a damp cloth while disconnected from the power supply. Allow to dry completely. p. 1
Technical specifications
| Parameter | Value | Meaning | Pages |
|---|---|---|---|
| Power supply | AC 230V/50Hz | Electrical input requirements | p. 1 |
| Operating temperature | -20°C to +50°C | Safe operating environment | p. 1 |
Where to find it in the PDF
- English User Guide p. 1
Table of contents
Quick guide from the manual
This guide covers the operation and safety instructions for the Solight Christmas lights series (1V110-M-1, 1V110-W-1, 1V110-WW-1). Before using the lights, ensure they are fully unpacked and unwound to prevent overheating. The lights feature multiple lighting modes and a built-in timer function.
Safety Instructions
- Unpack and Unwind: Always fully unwind the lights before plugging them into a power outlet to prevent overheating and fire hazards.
- Heat Sources: Do not place the lights near other heat sources and do not cover them during operation.
- Damage Check: Do not use the lights if they are damaged, including the cable, or if there has been a short circuit or high-voltage surge.
- Power Adapter: Use only the supplied power adapter. Never connect the lights directly to the mains or other products.
- Outdoor Use: The product complies with IP44 protection class and is suitable for outdoor use.
- Handling: Do not tamper with the wiring. Keep out of reach of children. The product is not a toy and should only be used by adults.
- Disposal: Protect the environment by disposing of the product at a designated collection point; do not discard with normal household waste.
Operation
Light Modes: The lights offer 8 modes: Combinations, waves, sequence, slow light up, quick blinking, slow fade, lightning, and steady on. Modes are switched using the button on the control.
Timer Function: The timer automatically turns the lights on and off. To activate, perform a long press on the button on the power adapter. Activation is indicated by a light on the button. The cycle consists of 6 hours on followed by 18 hours off, repeating until the timer is manually turned off.
Maintenance
To clean the lights, use a damp cloth. Always disconnect the lights from the electricity mains before cleaning and allow them to dry completely before using them again. Disconnect the lights from the mains when not in use.
Technical Specifications
Power supply: AC 230V/50HzOperating temperature: -20°C to +50°C
Practical help
Common problems
Lights overheating
Ensure the lights are fully unwound from the box before plugging them in.
Timer not activating
Ensure you are performing a long press on the button on the power adapter. Activation is confirmed by a light on the button.
Damaged cable or short circuit
Do not use the lights if they are damaged in any way. Disconnect immediately.
Before use
- Unpack the lights from the box.
- Unwind the lights fully before plugging them into a power outlet.
- Verify the power adapter is the one supplied with the product.
- Check for any damage to the cable or lights.
Specs in practice
- AC 230V/50Hz
- Standard power supply requirements.
- -20°C to +50°C
- Operating temperature range.
Model compatibility
- Use only the supplied power adapter.
- Do not connect to other products.
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.