Somfy 1870533-PHYS Digital Motor Interface Installation Guide
Technical specifications and physical dimensions for the Somfy 1870533-PHYS Digital Motor Interface (Control4 to DMI), including port layout and mounting requirements.
Table of contents
Quick guide from the manual
The Somfy 1870533-PHYS is a Digital Motor Interface (DMI) designed to bridge Control4 systems with Somfy motor technology. This document serves as a technical specification sheet detailing the physical dimensions and connection ports required for installation.
Device description
The device is a compact interface module designed for integration into control systems. It features a standardized housing with mounting holes for secure installation.
Connections
The interface includes dedicated ports for system integration:
- IN port: Used for incoming control signals.
- OUT port: Used for outgoing signals to connected motors or devices.
- SDN port: Somfy Digital Network connection for communication with the motor bus.
Technical specifications
- Dimensions: 3.97 inches (101mm) width x 1.99 inches (51mm) depth x 0.97 inches (25mm) height.
- Mounting holes: 0.19 inches (5mm) diameter.
- Part number: 1870533.
Contact information
For technical support or inquiries, contact Somfy Systems, Inc. at 1-800-64-SOMFY or visit www.somfysystems.com.
Official resources from the manual
Practical help
Common problems
The unit requires a mounting footprint of 3.97" x 1.99" and a clearance height of 0.97".
The device features clearly labeled IN, OUT, and SDN ports on the side panel for system wiring.
Before use
- Verify the part number 1870533 matches your system requirements.
- Ensure the mounting surface can accommodate 5mm diameter screws.
- Confirm compatibility with your Control4 system and Somfy motor bus.
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.