Specification Sheet for Somfy 1870533-PHYS Digital Motor Interface
Technical specification sheet and dimensional drawing for the Somfy 1870533-PHYS Digital Motor Interface. Includes physical dimensions and port layout for installation planning.
Table of contents
Quick guide from the manual
This document serves as the official technical specification and dimensional drawing for the Somfy Control4 to DMI (Digital Motor Interface), part number 1870533. It is intended for installers and system integrators to assist with the physical planning and mounting of the device.
Physical Dimensions
The device is designed with the following physical dimensions:
- Width: 3.97 inches (101 mm)
- Depth: 1.99 inches (51 mm)
- Height: 0.97 inches (25 mm)
- Mounting holes: 0.19 inches (5 mm) diameter
Port Configuration
The interface unit features the following connection ports located on the side panel:
- IN: Input port for control signals.
- OUT: Output port for motor control.
- SDN: Somfy Digital Network port.
Contact Information
For technical support or inquiries regarding this product, you may contact Somfy Systems, Inc.:
Tel: 1-800-64-SOMFYFax: 1-609-495-8165Website: www.somfysystems.comAddress: 121 Herrod Boulevard, Dayton, NJ 08810
Official resources from the manual
Practical help
Before use
- Verify the part number 1870533 matches your specific project requirements.
- Ensure the mounting surface can accommodate the device footprint of 3.97" x 1.99".
- Confirm clearance for the 0.97" height profile.
- Identify the location of IN, OUT, and SDN ports before finalizing cable routing.
Specs in practice
- Mounting Hole Diameter
- 0.19" (5mm)
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.