Somfy RTS Repeater 1810791 Installation Guide
Quick installation guide for the Somfy RTS Repeater (1810791). Learn how to extend the range of your RTS motorized window coverings, awnings, and screens with this simple plug-in device.
Table of contents
Quick guide from the manual
The Somfy RTS Repeater (Part Number 1810791) is designed to extend the range of Radio Technology Somfy (RTS) signals. It receives signals from Somfy controls or sensors and transmits them to compatible motorized window coverings, awnings, screens, pergolas, and rolling shutters. This device is intended for indoor use only.
Installation
Follow these steps to install the repeater:
- Locate a standard 120V electrical outlet.
- Plug the repeater directly into the outlet.
- Position the repeater at least halfway between the motorized device (awning, screen, etc.) and the control or sensor.
- Observe the red LED on the repeater; a blinking light indicates that communication has been successfully achieved.
Compatibility and Disposal
The RTS Repeater is compatible with all RTS transmitters and motors. This device is FCC certified and complies with part 15 of the FCC rules. When disposing of the unit, please recycle electrical components and batteries according to local codes and regulations at designated electronic recycle centers.
Practical help
Common problems
Ensure the repeater is plugged into a live 120V outlet and is positioned within range of both the controller and the motorized device.
Before use
- Verify the device is for indoor use only.
- Ensure you have a 120V electrical outlet available.
- Confirm your motorized equipment is RTS compatible.
- Identify the optimal location halfway between the controller and the motorized device.
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.