Intensifier T® Series HD-TVI 1080p 2MP Bullet Camera
Professional 2MP HD-TVI bullet camera with motorized zoom, True WDR, and IP67 weather resistance for high-performance surveillance.
Table of contents
Product Overview
The Intensifier T® Series HD-TVI 1080p 2MP Bullet Camera is a high-performance surveillance solution designed for both indoor and outdoor environments. Available in two models, the HTi70TM (2.8-12mm lens) and HTi702TM (5-50mm lens), these cameras feature motorized zoom and focus capabilities for precise image adjustment. Built with a rugged, weather-resistant IP67-compliant housing and an integrated heater with anti-fog glass, the camera ensures reliable operation in challenging conditions.
Key Features and Performance
This camera delivers full HD 1080p resolution over coaxial cable using HD-TVI technology, supporting distances up to 1600 feet depending on cable quality. It excels in low-light scenarios, utilizing advanced amplification to provide clear images without distance limitations. The camera includes True WDR (Wide Dynamic Range) to balance lighting in high-contrast scenes and offers multiple presets such as Outdoor, Low Light, Hallway, Lobby, Elevator, and Indoor to quickly optimize performance for specific environments.
Installation and Setup
The camera is designed for versatile wall or ceiling mounting using a 3-axis adjustment mechanism. It supports dual voltage operation (12VDC/24VAC). Configuration is managed through a comprehensive On-Screen Display (OSD) menu, which can be accessed via the on-board joystick or remotely through UTC (Up the Coax) communication. The OSD menu allows for detailed adjustments to exposure, backlight compensation (WDR, BLC, HLC), day/night switching, and image quality settings like sharpness, gamma, and digital noise reduction (SPECO DNR).
Advanced Configuration
Users can fine-tune the camera's behavior through the OSD menu. The Day/Night settings allow for automatic switching based on AGC levels, while the Motion detection feature provides customizable sensitivity and detection zones. The System menu enables output configuration, frame rate selection (1080p 30 / 720p 60), and camera titling. For troubleshooting or initial setup, a dedicated CVBS test monitor output is provided. The motorized lens system supports autofocus modes, scanning, and one-push focus for easy installation. Regular maintenance involves ensuring the lens remains clean and the housing is securely mounted to maintain the IP67 weather seal.
Practical help
Common problems
Enable and configure WDR (Wide Dynamic Range) in the Backlight menu to balance brightness.
Adjust the SPECO DNR (Digital Noise Reduction) settings to Low, Middle, or High.
Ensure the anti-fog glass is clean and activate the DEFOG mode in the Image menu if weather conditions require it.
Navigate to the System menu in the OSD and select the RESET option with a long press.
Before use
- Verify power supply is 12VDC or 24VAC.
- Ensure coaxial cable quality supports the required distance (up to 1600ft).
- Check that the mounting surface is stable for wall or ceiling installation.
- Confirm the lens focal length (2.8-12mm or 5-50mm) matches the surveillance area requirements.
- Connect the CVBS test monitor to the yellow BNC output for initial aiming and focusing.
Specs in practice
- UTC (Up the Coax)
- Allows remote control of the camera's OSD menu through the existing video coaxial cable.
- Motorized Zoom
- Allows for remote adjustment of the lens focal length and focus via the OSD menu.
Model compatibility
- Compatible with HD-TVI DVRs for full 1080p resolution.
- Includes an additional 960H analog output for legacy test monitors.
- Supports dual voltage (12VDC/24VAC) power inputs.
- Optional INTCM1 accessory is required for pole or corner mounting.
Manual page author
David Miller
Documentation analyst
Organizes user manual content into clear summaries, with attention to model details, product context, and everyday usability.