Tecnolite Aurora Crystal Pendant Lamp 180CTL8361MVCH

Product Overview

The Tecnolite Aurora Crystal Pendant Lamp (model 180CTL8361MVCH) is a high-quality indoor lighting fixture designed for aesthetic appeal and reliable performance. It utilizes E27 base lamps, supporting three LED bulbs of 8.5 W each. This fixture is designed for interior use and requires proper installation to ensure safety and longevity.

Technical Specifications

• Model: 180CTL8361MVCH
• Power Supply: 100 V - 240 V ~ 50 Hz/60 Hz
• Current: 0.26 A - 0.11 A
• Lamp Base: E27
• Light Source: 8.5 W LED x 3

Safety Instructions

Before beginning installation, please read all instructions carefully. Ensure the power supply is disconnected before starting any work. The fixture must be installed at a minimum distance of 0.50 meters from any combustible material to prevent fire hazards. During operation, the lamp and its components may become hot; allow them to cool before handling, or use protective gloves.

Installation

The installation process involves securing the mounting bracket to the ceiling, connecting the electrical wiring, and attaching the lamp housing. Ensure the ground connection is physically secure. The wiring diagram provided in the manual indicates the connection points for Line, Neutral, and Ground. Follow the step-by-step visual guide to mount the anchors, screws, and the connector block correctly. Ensure all connections are tight and secure before restoring power.

Maintenance and Care

To maintain the appearance and functionality of the lamp, clean the fixture and its internal parts periodically. Always disconnect the power supply before cleaning. Use a dry rag to wipe down the surfaces. Do not use abrasive cleaners or liquids that could damage the finish or electrical components. Regularly check that all connections remain secure.

Troubleshooting and Disposal

If the lamp fails to operate, verify that the bulbs are correctly installed and that the power supply is active. Check all electrical connections for loose wires. If the issue persists, consult a qualified electrician. When the product reaches the end of its service life, dispose of it according to local environmental regulations for electronic waste.