User Manual for Tecnolite 20LHBLEDMVTCRGBCBW LED Light Fixture
Quick guide for the Tecnolite 20LHBLEDMVTCRGBCBW LED light fixture. Includes installation steps, safety warnings, maintenance instructions, and technical specifications.
Quick answers from the manual
Quick answer
- The Tecnolite 20LHBLEDMVTCRGBCBW is an LED light fixture. Installation requires disconnecting the power supply, installing the unit, and reconnecting power. p. 1
Key actions
- Installation p. 1
- Maintenance p. 1
Maintenance and reset
- Clean the lamp and its parts with a dry rag and check the connections periodically. p. 1
Technical specifications
| Parameter | Value | Meaning | Pages |
|---|---|---|---|
| Voltage | 100 V ~ 240 V | Operating voltage range | p. 1 |
| Power | 20 W | Power consumption | p. 1 |
| Base | E27 | Bulb base type | p. 1 |
Where to find it in the PDF
- Installation and Specifications p. 1
Table of contents
Important Information
This document provides instructions for the Tecnolite 20LHBLEDMVTCRGBCBW LED light fixture. Always ensure the power is disconnected before performing any installation or maintenance tasks.
Installation
- Disconnect the electrical power source.
- Install the fixture according to the specific mounting requirements.
- Reconnect the power source.
Safety Warnings
- This appliance is not intended for use by individuals (including children) with reduced physical, sensory, or mental capabilities, or lack of experience or knowledge, unless they are supervised or trained.
- Children should be supervised to ensure they do not play with the appliance.
- Disconnect the power source before replacing the lamp.
Maintenance
Disconnect the power source before cleaning. Clean the lamp and its parts with a dry rag and check the connections periodically.
Technical Specifications
- Voltage: 100 V ~ 240 V, 50/60 Hz
- Power: 20 W
- Current: 0.20 A - 0.08 A
- Base: E27
- Lamp Type: LED
Warranty Information
The product includes a warranty for defects in materials or components. LED light fixtures are covered for 5 years. This warranty does not cover installation or uninstallation costs.
Manufacturer information
Tecnolite
Practical help
Common problems
Check if the power supply is connected and ensure the bulb is properly screwed into the E27 base.
Before use
- Ensure power is disconnected before installation
- Verify voltage compatibility (100-240 V)
- Use with compatible E27 base
- Ensure the area is dry
Manual page author
David Miller
Documentation analyst
Organizes user manual content into clear summaries, with attention to model details, product context, and everyday usability.