Installation and User Guide for Tecnolite 18HLED123MV30N Outdoor Light
Quick guide for the Tecnolite 18HLED123MV30N outdoor light. Includes installation steps, technical specifications, safety warnings, and warranty information.
Quick answers from the manual
Quick answer
- The 18HLED123MV30N is an outdoor LED luminaire. Installation involves disconnecting power, mounting the base, connecting wires (Line, Ground, Neutral), and securing the fixture. Always maintain a 0.5m distance from combustible materials. p. 1
Key actions
- Installation p. 1
- Maintenance p. 1
Maintenance and reset
- Clean the luminaire and its internal parts with a dry rag and check the connections periodically. p. 1
Technical specifications
| Parameter | Value | Meaning | Pages |
|---|---|---|---|
| Power Supply | 100 V - 240 V | Operating voltage range | p. 1 |
| Power | 18 W | Power consumption | p. 1 |
Where to find it in the PDF
- Installation and Specifications p. 1
- Warranty Information p. 2
Table of contents
Quick guide from the manual
This document provides installation and safety instructions for the Tecnolite 18HLED123MV30N outdoor light. Always disconnect the power source before installation or maintenance. Ensure the fixture is installed at least 0.50 meters away from any combustible material to prevent fire hazards.
Installation
- Preparation: Disconnect the electric power source before starting.
- Mounting: Drill holes and mount the base using the provided accessories (A-01, A-02, A-03).
- Wiring: Connect the wires according to the diagram: Line, Ground (must be physical), and Neutral.
- Final Assembly: Secure the luminaire to the base using the Allen wrench (A-04).
Maintenance
The lamp and parts may become hot during operation; use gloves and a clean rag when handling. Clean the luminaire and internal parts with a dry rag and periodically check all electrical connections.
Technical Specifications
- Power Supply: 100 V - 240 V, 50/60 Hz
- Power Consumption: 18 W
- Lamp Type: LED
- Protection Ratings: IP65 (Dust tight and protected against water jets), IK06 (Protected against 1 Joule impact)
Manufacturer information
Tecnolite
Practical help
Common problems
This is normal. Use gloves and a clean rag when handling the luminaire to avoid burns.
Ensure the luminaire is installed at least 0.50 meters away from any combustible material.
Before use
- Disconnect the electric power source
- Verify the mounting surface is suitable
- Ensure the ground connection is physical
- Check that the voltage matches the product label (100-240V)
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.