Installation Guide for The Home Depot 2-Light Brushed Gold Wall Sconce
Quick installation guide for the 2-Light Brushed Gold Wall Sconce. Includes wiring instructions, safety precautions, and technical specifications for E12 base lighting.
Quick answers from the manual
Quick answer
- This document provides installation instructions for the 2-Light Brushed Gold Wall Sconce, including wiring steps and safety precautions. p. 1
Key actions
- Secure the hanging plate to the junction box. p. 1
- Connect wires using wire nuts. p. 1
First start
- Turn off power, mount the plate, connect wires, secure the fixture, and install the bulb. p. 1
Technical specifications
| Parameter | Value | Meaning | Pages |
|---|---|---|---|
| Voltage | 110VAC | Operating voltage | p. 1 |
| Base Type | E12 | Bulb socket type | p. 1 |
Where to find it in the PDF
- Installation and Specifications p. 1
Table of contents
Quick guide from the manual
This document provides essential installation and safety information for the 2-Light Brushed Gold Wall Sconce. For safety reasons, it is strongly advised to turn off the power before beginning installation and to consult with a professional electrician.
Product specifications
- Style: Modern/Contemporary
- Material: Metal
- Color: Brushed Gold
- Base Type: E12
- Voltage: 110VAC
- Wattage: 40W
- Light Source: Not included
Installation instructions
- Secure the hanging plate to the junction box using the provided screws.
- Connect the wires using wire nuts: connect the white extension wire to the white supply wire, and the black extension wire to the black supply wire.
- Secure the fixture to the mounting plate using the cap nuts.
- Secure the glass shade using the lamp socket ring and install the light source (bulb).
Important notes
Use this product only for its intended purpose. Do not attempt to retrofit or remodel the fixture. The warranty does not cover failures caused by third-party products or natural disasters.
Manufacturer information
The Home Depot
Practical help
Common problems
Ensure the light source (bulb) is properly installed and check that wire connections (white-to-white, black-to-black) are secure.
Always turn off the power at the circuit breaker before starting. If you are not comfortable with electrical wiring, contact a professional electrician.
Before use
- Turn off power at the main circuit breaker
- Verify the junction box is compatible and secure
- Ensure you have E12 base bulbs available (not included)
- Check that all parts from the accessories kit are present
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.