Baby / Activity Centers
User manual for Tiny Love Gymini Kick & Play
Quick guide for the Tiny Love Gymini Kick & Play activity gym. Includes assembly instructions, battery installation, care and washing guidelines, and safety warnings.
Table of contents
Quick guide from the manual
The Tiny Love Gymini Kick & Play is an activity gym designed for infants. This guide covers the essential setup, battery requirements, and maintenance. Always ensure adult assembly is performed away from the baby. The product requires 3 AA (1.5V type LR6) batteries (not included) and a Phillips screwdriver for assembly.
Assembly instructions
Assembly must be performed by an adult. Ensure the baby is not on the mat during the assembly or disassembly process. The arches must be securely attached to the mat before allowing the baby to play. Refer to the assembly diagrams provided in the manual for the correct connection of the arches to the mat base.
Battery installation
To install or replace batteries:
- Use 3 AA (1.5V type LR6) batteries.
- Ensure the correct polarity is observed when inserting batteries.
- Do not mix old and new batteries, or different types of batteries (alkaline, standard, or rechargeable).
- Check that all contact surfaces are clean before installation.
- Remove exhausted batteries from the product immediately.
- Remove batteries if the product will be stored for long periods.
Care and storage
Proper maintenance ensures the longevity of the product:
- Padded mat: Machine washable on a cold, mild cycle. Do not bleach, do not tumble dry, do not iron, and do not dry-clean. Line dry only.
- Toys: Wipe clean with a damp cloth.
- General: Do not submerge other parts of the product in water.
Safety warnings
- Adult assembly is required.
- Never assemble or dismantle the product while the baby is on the mat.
- Do not modify or alter the product.
- Do not leave children unattended at any time.
- Do not allow the baby to play with the arches when they are not attached to the mat.
Manufacturer information
Tiny Love
Practical help
Common problems
Product does not function
Check that batteries are installed with the correct polarity, ensure contact surfaces are clean, and try using fresh alkaline batteries.
Radio or television interference
Reorient or relocate the receiving antenna, increase the separation between the equipment and the receiver, or connect the equipment to a different circuit.
Before use
- Ensure you have a Phillips screwdriver (not included).
- Purchase 3 AA (1.5V type LR6) batteries.
- Verify that the baby is not on the mat during assembly.
- Check that all battery contact surfaces are clean and bright.
- Ensure the arches are securely attached to the mat before use.
Specs in practice
- Battery Type
- Requires 3 AA (1.5V type LR6) batteries.
- Toy Cleaning
- Wipe with a damp cloth only; do not submerge.
Images and diagrams
- The assembly diagram illustrates the connection of the arches to the mat base and the battery compartment location.
Manual page author
Michael Turner
Technical manual editor
Reviews PDF manuals for structure, safety notes, and practical product details so readers can find the right information quickly.