TRIO Salmon 546960135 Outdoor Light User Manual
Quick guide for the TRIO Salmon 546960135 outdoor light. Includes installation steps, wiring instructions, technical specifications, and safety requirements.
Table of contents
Manual images
Click an image to enlargeQuick guide from the manual
This document provides essential installation and safety instructions for the TRIO Salmon outdoor light (Art.-Nr. 546960135). Before beginning any installation work, ensure you have read and understood the safety instructions provided on the first page of the manual.
Installation
The installation process involves mounting the light to a stable surface and connecting the electrical wiring. Ensure the power supply is disconnected before starting any work.
- Mounting: Secure the base of the light to the ground using appropriate screws and plugs suitable for the surface material.
- Wiring: Connect the power cable to the terminal block. Ensure the wires are connected correctly to the L (Live), N (Neutral), and Earth terminals.
- Cable Requirements: The unit requires a cable with a cross-section of 5x 1.5 mm² and a diameter of approximately 13 mm.
Technical Specifications
The device operates under the following parameters:
- Voltage: 230V~50Hz
- Light Source: 1x LED 11W
- Protection Class: IP44 (protected against solid objects over 1mm and splashing water)
- Energy Efficiency: Class F
Practical help
Common problems
Check if the power supply is connected correctly to the L, N, and Earth terminals.
Ensure the unit is installed correctly and the IP44 seal is intact.
Before use
- Ensure the power supply is 230V~50Hz.
- Verify the mounting surface is stable.
- Check that the cable diameter is approximately 13 mm.
- Ensure the cable cross-section is 5x 1.5 mm².
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.