Installation Guide for TRIO 223410107 Wall Light
Installation guide for the TRIO 223410107 wall light. Includes wiring diagrams, technical specifications, and safety instructions for proper setup.
Quick answers from the manual
Quick answer
- This document is an installation manual for the TRIO 223410107 wall light, providing wiring instructions, technical specifications, and safety warnings. p. 1, 2
Key actions
- Read safety instructions before starting installation. p. 1
- Connect the electrical wires (L, N, Ground) according to the diagram. p. 2
Technical specifications
| Parameter | Value | Meaning | Pages |
|---|---|---|---|
| Voltage | 230V~50Hz | Operating voltage | p. 2 |
| Power | 4.3W | Power consumption | p. 2 |
| IP Rating | IP20 | Ingress protection | p. 2 |
Where to find it in the PDF
- Safety Warnings p. 1
- Installation and Technical Data p. 2
- Energy Efficiency Declaration p. 3
Table of contents
Important Safety Information
Before beginning any installation work, please read the safety instructions carefully. Ensure that the power supply is disconnected before starting the installation to prevent electrical shock.
Installation and Wiring
The installation process involves mounting the fixture to the wall and connecting the electrical supply. Follow the steps outlined in the provided diagram:
- Mounting: Secure the mounting bracket to the wall using the appropriate screws and wall plugs provided.
- Wiring: Connect the electrical wires to the terminal block. Ensure the Live (L) and Neutral (N) wires are connected correctly. The fixture must be grounded.
- Assembly: Once the wiring is secure, attach the light fixture to the mounting bracket.
Technical Specifications
The TRIO 223410107 wall light operates under the following specifications:
- Voltage: 230V~50Hz
- Light Source: 1 x LED / 4.3W
- Protection Rating: IP20
Energy Efficiency
This product contains a light source of energy efficiency class F.
Practical help
Common problems
Check if the power supply is connected correctly and if the circuit breaker is on.
Ensure the mounting bracket is securely fastened to the wall surface using appropriate hardware.
Before use
- Ensure the main power supply is switched off at the circuit breaker.
- Verify that the wall surface is suitable for mounting the fixture.
- Check that the voltage of your electrical supply matches the 230V~50Hz requirement.
- Ensure all necessary tools for installation are available.
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.