Ubiquiti 10Gbps Ethernet to USB-C Adapter Installation Guide
Quick installation guide for the Ubiquiti 10Gbps Ethernet to USB-C Adapter. Learn how to connect the adapter to your network and computer for high-speed 10G connectivity.
Table of contents
Manual images
Click an image to enlargeQuick Installation Guide
This guide provides the necessary steps to connect your Ubiquiti 10Gbps Ethernet to USB-C Adapter to your network and computer to achieve high-speed connectivity.
Package Contents
Ensure the following items are included in the package:
- 1x 10Gbps Ethernet to USB-C Adapter
- 1x USB-C cable
Installation and Connection
Follow these steps to set up your adapter:
- Connect the provided USB-C cable to the adapter.
- Connect the other end of the USB-C cable to your computer (Mac or PC).
- Connect an Ethernet cable from your 10G network switch to the Ethernet port on the adapter.
Network Topology
The adapter is designed to bridge your computer to a high-speed 10G network. The typical setup involves an Internet connection, a UniFi Cloud Gateway, a 10G network switch, and finally the adapter connected to your computer.
Support
If you need further assistance, visit the Ubiquiti Help Center or contact Ubiquiti Support.
Practical help
Common problems
Ensure the USB-C cable is securely connected to both the adapter and the computer. Verify that the Ethernet cable is connected to a 10G-capable network switch.
Before use
- Verify you have the adapter and the included USB-C cable.
- Ensure your computer has a USB-C port.
- Ensure your network switch supports 10G Ethernet speeds.
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.