VEVOR 15YKL Automotive Tail Light Assemblies Instruction Manual

Product Overview

The VEVOR 15YKL automotive tail light assembly is designed for GMC Yukon vehicles (2015-2020). This high-quality replacement unit features a combination of LED and halogen light sources, housed in a durable ABS, PC, and PMMA construction. It is rated for 12V DC operation and is designed for the left-hand (LH) position.

Important Safeguards

Warning: Read and understand the entire manual before operating or servicing this product. Failure to follow these instructions can result in personal injury or property damage. This product is not a toy; keep it away from children. It is highly recommended that installation be performed by a professional car modification service shop.

Assembly Precautions

• Assemble only according to these instructions to avoid hazards.
• Wear ANSI-approved safety goggles and heavy-duty work gloves during the process.
• Ensure the work area is clean and well-lit.
• Keep bystanders away during assembly.
• Do not attempt installation if tired or under the influence of alcohol or medication.

Installation Procedure

The installation process involves removing the existing tail light assembly and installing the new unit. Key steps include removing the retainer clip and panel, unscrewing the assembly, and disconnecting the electrical harness located near the rear bumper. When installing the new unit, ensure the harness is connected securely, the tabs and pins are aligned, and the screws are tightened properly. Always test the lights after installation to ensure correct operation.

Troubleshooting Condensation

If you notice condensation inside the tail light housing, consider the following solutions:

• Temperature Changes: Turn on the lights for 20 minutes to raise the internal temperature and evaporate moisture. Ensure all vents are free from blockages.
• Leaking Seals: If seals on bulbs or sockets are leaking, remove the bulbs to allow moisture to escape. Use a hairdryer to speed up the drying process.
• Moisture Accumulation: For persistent issues, place a moisture-absorbing silica-gel desiccant packet inside the housing.

Technical Specifications

• Model: 15YKL
• Material: ABS+PC+PMMA
• Voltage: DC12V
• Light Source: LED and Halogen
• Compatibility: GMC Yukon 2015-2020