VEVOR 2-in-1 Snow Brush AD-04674 User Guide
Quick guide for the VEVOR 2-in-1 Snow Brush (Model AD-04674). Learn how to assemble, disassemble, and use the snow brush and ice scraper effectively.
Quick answers from the manual
Quick answer
- The VEVOR 2-in-1 Snow Brush (AD-04674) features a detachable head. Press the button on the handle and slide the brush head forward or backward to install or remove it. p. 1
Key actions
- Attach/Detach Brush Head p. 1
First start
- Assemble the brush head to the handle by pressing the release button and sliding the components together until they lock. p. 1
Show 2 more answers Show less
Problems and fixes
Press the button firmly while sliding the handle.
p. 1Where to find it in the PDF
- English Instructions p. 1
Table of contents
Manual images
Click an image to enlargeQuick Guide
The VEVOR 2-in-1 Snow Brush (Model AD-04674) is designed for easy assembly and disassembly. The primary operation involves using the locking button on the handle to attach or remove the brush head from the ice scraper unit.
Product Overview
The device consists of two main parts: the snow brush head and the ice scraper handle. These components can be connected or separated based on your cleaning needs.
Assembly and Disassembly
To attach or remove the brush head from the handle, follow these steps:
- Locate the button on the handle.
- Press and hold the button firmly.
- While holding the button, push or pull the handle forward or backward to slide the components together or apart.
- Ensure the mechanism locks securely when assembling.
Support
For further assistance, visit the VEVOR Support Center at www.vevor.com/support.
Official resources from the manual
Manufacturer information
VEVOR
Practical help
Common problems
Ensure the locking button is fully pressed while sliding the handle forward or backward.
Before use
- Check that the brush bristles are intact and free of debris.
- Ensure the ice scraper edge is clean and undamaged.
- Verify the locking button mechanism moves freely before attempting to attach the brush head.
Manual page author
Michael Turner
Technical manual editor