Mobile / Smartphones
Xiaomi Redmi Note 10S Smartphone Safety Information
Safety and regulatory information for the Xiaomi Redmi Note 10S (Model M2101K7BNY), including SAR exposure limits, EU/FCC compliance, and power adapter specifications.
Table of contents
Product Overview
The Xiaomi Redmi Note 10S (Model M2101K7BNY) is a digital mobile phone supporting GSM, GPRS, EDGE, UMTS, and LTE networks, along with Bluetooth and Wi-Fi connectivity. This document provides essential safety, regulatory, and certification information required for operation.
RF Exposure and Safety
This device complies with Specific Absorption Rate (SAR) limits for general population/uncontrolled exposure. The SAR limit is 2.0 W/kg (10g) in the EU and 1.6 W/kg in the US. For safe operation, maintain a minimum separation distance of 5 mm from the body (EU) or 1.5 cm (US). When using body-worn accessories such as belt clips or holsters, ensure they do not contain metallic components to maintain the required separation distance.
Regulatory Compliance
The device is compliant with the RE Directive 2014/53/EU and Part 15 of the FCC Rules. Operation is subject to the condition that the device does not cause harmful interference and must accept any received interference. The full text of the EU Declaration of Conformity is available at www.mi.com/en/certification.
Electronic Label
The device features an electronic label for certification information. To access it, navigate to Settings > About phone > Certification, or type 'Certification' into the search bar in Settings.
Power Adapter Specifications
The included power adapter (Model MDY-11-EZ) supports the following specifications:
- Input: 100-240V~, 50/60Hz
- Output Voltage: 5.0V/9.0V/12.0V/20.0V/11.0V
- Output Current: Up to 3.0A
- Output Power: Up to 33.0W
- Average active efficiency: ≥82.0%
Official resources from the manual
Manufacturer information
Xiaomi Corporation
Practical help
Common problems
Interference with radio or television reception
Reorient or relocate the receiving antenna, increase the separation between the equipment and receiver, or connect the device to a different circuit outlet.
Compliance issues with body-worn accessories
Avoid using accessories containing metal components. Ensure any holster or clip maintains at least 5 mm (EU) or 1.5 cm (US) distance from the body.
Before use
- Verify the device model is M2101K7BNY.
- Ensure the power adapter (MDY-11-EZ) is used with the correct input voltage (100-240V).
- Check that no metallic accessories are attached to the device when worn on the body.
- Access the electronic label via Settings > About phone > Certification to confirm regional compliance.
Specs in practice
- SAR (Specific Absorption Rate)
- A measure of the rate at which energy is absorbed by the human body when exposed to a radio frequency electromagnetic field.
- Output Power (Adapter)
- The maximum power delivered by the charger, reaching up to 33W for fast charging.
- Frequency Bands
- The specific radio frequencies the device is certified to operate on within EU regions.
Model compatibility
- Device is designed for use in EU regions for the specified frequency bands.
- Compliance with FCC Part 15 requires the use of shielded cables.
Manual page author
David Miller
Documentation analyst
Organizes user manual content into clear summaries, with attention to model details, product context, and everyday usability.