Yamaha Y16ZR Doxou Emblem Installation Manual
A step-by-step installation guide for the Yamaha Y16ZR Doxou Emblem. Includes cleaning instructions and precise positioning measurements for both Standard and Accessory visors.
Quick answers from the manual
Quick answer
- To install the Doxou emblem, clean the visor surface with soap and water, remove the adhesive liner, and stick the emblem in the specified position (7mm gap for Standard Visor; 3-4mm top/2-3mm bottom gap for Accessory Visor). p. 2, 3
Key actions
- Install on Standard Visor p. 2
- Install on Accessory Visor p. 3
Technical specifications
| Parameter | Value | Meaning | Pages |
|---|---|---|---|
| Standard Visor Gap | 7mm | Distance from top edge | p. 2 |
| Accessory Visor Top Gap | 3-4mm | Distance from top edge | p. 3 |
| Accessory Visor Bottom Gap | 2-3mm | Distance from bottom edge | p. 3 |
Where to find it in the PDF
- Standard Visor Installation p. 2
- Accessory Visor Installation p. 3
Table of contents
Manual images
Click an image to enlargeQuick guide from the manual
This manual provides instructions for installing the Doxou emblem on Yamaha Y16ZR visors. The installation process requires cleaning the surface and adhering the emblem in a specific position. Ensure the surface is clean and dry before application.
Installation on Standard Visor
- Clean the visor surface thoroughly using soap and water.
- Remove the adhesive liner from the back of the DOXOU emblem.
- Carefully stick the emblem onto the visor. Position it with a 7mm gap from the top edge as indicated in the diagram.
Installation on Accessory Visor
- Clean the visor surface thoroughly using soap and water.
- Remove the adhesive liner from the back of the DOXOU emblem.
- Carefully stick the emblem onto the visor. Position it with a 3-4mm gap from the top edge and a 2-3mm gap from the bottom edge as indicated in the diagram.
Manufacturer information
Yamaha
Practical help
Common problems
Emblem does not stick properly
Ensure the visor surface is thoroughly cleaned with soap and water and completely dry before applying the emblem.
Before use
- Soap and water for cleaning
- Clean cloth for drying
- DOXOU emblem with adhesive liner
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.