AC Infinity ThermoForge S7 Plant Heater Quick Start Guide

Quick Guide from the Manual

The AC Infinity ThermoForge S7 is designed for plant environments. Key operational requirements include keeping the unit in an upright position at all times to prevent tilt alarms and overheat protection triggers. Ensure the heater is placed on a flat surface and is not obstructed by flammable materials.

Product Contents

The package includes the following items:

• Heater Unit
• Extension Cord (M-M)
• Wire Ties
• Hook & Loop Ties

Installation

No Ducting: Place the heater to the side of your tent and direct the exhaust vent into the lower tent port. Ensure the heater body is not touching the side of the tent or any flammable items.

Ducting: Use 4-inch heat-resistant ducting to connect your heater to the tent. Twist the duct into the exhaust vent. If using ducting for the intake vent, attach it with a duct clamp.

Powering: Plug the heater's power plug into an outlet. The light at the front will illuminate when receiving power.

Programming Settings

The heater features a control panel with the following functions:

• Power Button: Turns the heater ON/OFF. Default settings are level 6; subsequent uses restore the previous setting.
• Up/Down Buttons: Adjusts the heat level between 1-10.
• Mode Button: Toggles between FAN and HEAT modes. HEAT mode is indicated by orange lights; FAN mode is indicated by white lights.
• Factory Reset: Hold the power and up buttons for 3 seconds to reset the heater and restore factory settings.
• Mute: Hold the power and down buttons for 2 seconds to mute or unmute the sound.

Alarms and Safety

Overheat Protection: If the heater overheats, an alarm will sound, the program will pause, and the first 5 lights will flash. Turn off the heater, let it cool, and restart.

Tilt Alarm: The heater must remain upright. If tilted past 20 degrees, an alarm will sound and the lights will flash. The heater will pause until it is returned to an upright position.

Cleaning and Maintenance

Regular cleaning is required to maintain performance:

1. Turn off the heater and unplug it.
2. Remove the filter from the intake vent.
3. Rinse the filter with water and let it dry completely before reinstalling.
4. Clean the grilles or vents using a damp cloth. Do not use detergents, solvents, or harsh chemicals.

Advanced Programming

The heater is compatible with specific controller models. Use the included extension cable to connect the heater to your controller. Note that the controller will override all onboard settings and shut off the heater's button functions when connected. This port is for the extension cable only; do not use it for other purposes.

Warranty and Support

AC Infinity provides a two-year warranty from the date of purchase. For support, visit www.acinfinity.com or contact them via email at [email protected] or by phone at 626-838-4656.