Bissell Aeroswift Vacuum 1808 Series User Guide

Product Overview

The Bissell Aeroswift 1808 series is a high-performance upright vacuum cleaner designed for household use. It features a powerful motor, a cyclonic dirt separation system, and adjustable height settings to accommodate various floor types, from bare floors to high-pile carpets.

Safety Instructions

Always follow basic safety precautions when using an electrical appliance. Do not leave the vacuum plugged in when not in use. Do not use outdoors or on wet surfaces. Keep hair, loose clothing, fingers, and all parts of the body away from openings and moving parts. Always turn off all controls before plugging or unplugging the vacuum.

Assembly and Operation

The vacuum requires minimal assembly. Attach the upper handle to the base unit until it clicks into place. Secure the hose and store accessories in their designated holders. To operate, select the appropriate height setting using the dial on the foot of the vacuum. Press the power pedal located on the lower back of the unit to turn the vacuum on or off.

Maintenance and Care

Regular maintenance is essential for optimal performance. Empty the dirt container when it reaches the full line. The cyclonic assembly and filters should be cleaned periodically with warm water and mild detergent. Ensure all components are completely dry before reassembling. Regularly inspect the brush roll and belt for debris or damage, and replace them if necessary.

Troubleshooting

If the vacuum loses suction or the brush roll stops rotating, check for clogs in the hose or brush area. Ensure the dirt container is seated correctly and that filters are clean and properly installed. If the vacuum is difficult to push, adjust the height setting to a higher position.