Tools / Power Tools
Bosch 18V-110 C Cordless Drill/Driver User Manual
Quick guide for the Bosch 18V-110 C cordless drill/driver, covering setup, operation, safety instructions, and maintenance.
Table of contents
Quick guide from the manual
This document provides essential information for the safe and efficient use of the Bosch 18V-110 C cordless drill/driver. Always read the full safety instructions before use.
Device Description
The tool is designed for driving and loosening screws and for drilling in wood, metal, ceramic, and plastic. The GSB model also supports impact drilling in brick, masonry, and stone.
Assembly
Important: Always remove the battery before performing any work on the tool (e.g., maintenance, tool change).
- Auxiliary Handle: Always use the auxiliary handle (4). To mount, turn the lower gripping end anticlockwise, pull back the intermediate piece (5), slide the handle over the drill chuck, and retighten.
- Drilling Depth: Use the depth stop (3) to set the desired drilling depth X.
- Tool Change: The drill spindle is locked when the on/off switch (17) is not pressed, allowing for quick tool changes. Open the keyless chuck (2) by turning in direction 1, insert the tool, and tighten firmly by hand in direction 2.
Operation
- Rotational Direction: Use the rotational direction switch (16) to change the direction. Do not operate while the on/off switch (17) is pressed.
- Operating Mode: Use the mode selector switch (8) to choose between drilling, screwdriving, or impact drilling (GSB model only).
- Speed/Torque: Adjust speed by varying pressure on the on/off switch (17). Use the gear selector (9) to choose between two speed ranges (1: low speed/high torque, 2: high speed/low torque).
- KickBack Control: Provides rapid shut-off if the tool suddenly rotates around the drilling axis. Indicated by a flashing LED.
Safety and Maintenance
Keep the tool and ventilation slots clean for safe operation. Protect the battery from heat, fire, and moisture. If the tool blocks, switch it off immediately to avoid high reaction moments.
Manufacturer information
Bosch
Practical help
Common problems
Tool does not switch on
Check if the KickBack Control function is faulty or if the battery is empty/defective.
Battery charge indicator does not light up
The battery may be defective and needs replacement.
Tool speed is reduced during operation
The tool may be overloaded or outside the permitted operating temperature range. Let it cool down or run at no load.
Before use
- Ensure the battery is fully charged.
- Check that the auxiliary handle is securely tightened.
- Ensure the correct tool bit is inserted and the chuck is tightened.
- Verify the correct rotational direction is set.
- Ensure the correct operating mode is selected.
Specs in practice
- KickBack Control
- Safety feature that shuts off the tool during sudden, unexpected rotation.
Images and diagrams
- The manual includes diagrams showing the tool components (1-19), tool change procedure (A), rotational direction setting (B), and belt clip usage (C).
Model compatibility
- Compatible with Bosch 18V GBA and ProCORE18V batteries.
- Supports Bluetooth Low Energy Module GCY 30-4 / GCY 42 / GCY 42 NC for connectivity features.
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.