findmanualpdf.com

Bosch GWX 18V-15 Angle Grinder User Manual

Quick guide for the Bosch GWX 18V-15 series angle grinder, covering safety, assembly, operation, and maintenance.

Table of contents

Manual images

Jump to the section
Mounting the protective guard Page 3 Vibration control auxiliary handle Page 4 Rotating the gear head Page 6 Correct grip position Page 11 Prohibited operation warning Page 11

Quick guide from the manual

This manual covers the Bosch GWX 18V-15 C, 18V-15 SC, 18V-15 P, and 18V-15 PSC angle grinders. It provides essential safety, assembly, and operating instructions. Always wear safety goggles and use the appropriate protective guard for your specific application.

Device description

The device is a cordless angle grinder designed for cutting, brushing, and roughing metal, stone, plastic, and composite materials, as well as drilling in stone with diamond core cutters without water. Models with the 'SC' and 'PSC' suffix feature a user interface for speed preselection and status monitoring.

Assembly and installation

Mounting the protective guard
Mounting the protective guard
Vibration control auxiliary handle
Vibration control auxiliary handle
Rotating the gear head
Rotating the gear head
Correct grip position
Correct grip position
Prohibited operation warning
Prohibited operation warning
  • Protective guard: Align the coding cams with the holder on the tool, press and hold the unlocking lever, and rotate until it clicks into place.
  • Auxiliary handle: Screw the standard or vibration-damping handle onto the gear head on the left or right side.
  • Abrasive tools: Use only original X-LOCK tools. Ensure the X-LOCK catches are open before mounting. Place the tool centrally and parallel to the bearing surface, then press it into the holder until it clicks.

Operation

To start the tool, push the on/off switch forward (or push the unlocking lever forward and then the switch up for P/PSC models). To stop, release the switch. The tool features a kickback stop, restart protection, and an impact shutdown system for safety.

Maintenance and cleaning

Remove the battery before any maintenance or transport. Keep the tool and ventilation slots clean for safe operation. Store accessories in a dry, frost-free environment.

Manufacturer information

Bosch

Brand profile
Manufacturer website https://www.bosch.com Support https://www.bosch.com/contact

Practical help

Common problems

Tool does not start

Check battery charge level and ensure the battery is properly inserted.

Kickback stop triggered

Set the on/off switch to the 'off' position and switch the tool on again.

Tool overheated

Run the tool at no-load to cool it down.

Before use

  • Check that the abrasive tool is correctly mounted and rotates freely.
  • Perform a test run of at least 1 minute without load.
  • Ensure the protective guard is correctly positioned.
  • Check battery charge level.
  • Ensure the auxiliary handle is securely attached.

Specs in practice

Rated voltage
18V DC
Max. disc diameter
125 mm

Images and diagrams

  • Figure A: Mounting the metal cover for cutting onto the protective guard.
  • Figure B: Removing the metal cover for cutting.
  • Figure C: Mounting the plastic cover for cutting.
  • Figure D: Removing the plastic cover for cutting.
  • Figure E: User interface details (speed preselection, status indicators).

Model compatibility

  • Compatible with GBA 18V and ProCORE18V batteries.
  • Use only original X-LOCK accessories.
  • Bluetooth Low Energy Module GCY 42 can be used for data transfer.

Related manuals

Related manuals from the same brand or category.

Manual page author

Emily Carter

User documentation editor

Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.