Tools / Power Tools
Bosch GTS 18V-216 Professional Cordless Table Saw User Manual
Quick guide for the Bosch GTS 18V-216 Professional cordless table saw, covering assembly, operation, safety instructions, maintenance, and troubleshooting.
Table of contents
Quick guide from the manual
This document provides essential instructions for the Bosch GTS 18V-216 Professional cordless table saw. It covers safe operation, assembly, and maintenance. Always remove the battery before performing any maintenance, changing accessories, or transporting the tool to prevent accidental startup.
Device Description
The GTS 18V-216 is a stationary power tool designed for straight longitudinal and cross-cutting in hardwood, softwood, chipboard, and fiberboard. It supports mitre angles from -30° to +30° and bevel angles from 0° to 45°.
Assembly
- Items included: Table saw with pre-fitted blade and riving knife, angle guide, parallel guide, additional parallel guide, protective cover, hex key, ring spanner, push stick, and table insert.
- Positioning the riving knife: Ensure the riving knife is in the top position, aligned with the center of the saw blade.
- Fitting components: Follow the specific figures (a through g) to install the table insert, protective cover, parallel guide, additional parallel guide, and angle guide.
Operation
- Transport vs. Work Position: The manual details how to transition the saw between transport and work positions, including adjusting the riving knife height and saw blade position.
- Setting Angles: Use the hand wheel for bevel angles (0°-45°) and the angle guide for mitre angles (-30° to +30°).
- Parallel Guide: Can be positioned on either side of the blade. Adjustments are made using the clamping handle and scale display.
Safety and Maintenance
- Safety: Always use the saw blade guard and riving knife for through-cutting. Never perform "freehand" operations. Always stand to the side of the saw blade, never in line with it.
- Maintenance: Keep the tool and ventilation slots clean. Regularly remove sawdust from under the table.
- Transport: Use the carrying handles and transport devices only; never use protective devices for lifting.
Manufacturer information
Bosch
Practical help
Common problems
Saw blade binding or kickback
Ensure the riving knife is correctly aligned and the fence is parallel to the blade. Use a push stick for narrow workpieces.
Dust extraction blockage
Switch off the tool, remove the battery, wait for the blade to stop, and clear the blockage from the dust extraction adapter or lower blade cover.
Inaccurate cuts
Check and adjust basic settings, such as the 0°/45° bevel stops and the parallelism of the saw blade and parallel guide.
Before use
- Remove battery before any maintenance or adjustment.
- Ensure all guards are in place and functioning correctly.
- Check that the saw blade is sharp, clean, and has sufficient set.
- Verify the riving knife is correctly positioned and aligned.
- Secure the tool to a flat, stable work surface.
- Ensure the work area is well-lit and clear of obstructions.
Specs in practice
- No-load speed
- 4500 min-1; the rotational speed of the blade without a load.
- Saw blade diameter
- 216 mm; the maximum size blade compatible with this saw.
- Max. workpiece height (0°)
- 70 mm; the maximum thickness of material that can be cut at a 0° bevel.
Model compatibility
- Compatible with GBA 18V and ProCORE18V batteries.
- Recommended for maximum performance: ProCORE18V ≥ 5.5 Ah.
- Compatible with Bosch saw stands like GTA 560 or GTA 60 W.
Manual page author
David Miller
Documentation analyst
Organizes user manual content into clear summaries, with attention to model details, product context, and everyday usability.