Tools / Power Tools
Bosch 18V-200 Professional Impact Wrench User Guide
Quick user guide for the Bosch 18V-200 Professional impact wrench, covering safety instructions, assembly, operation, and maintenance.
Table of contents
Quick guide from the manual
This document provides essential information for the safe and efficient use of the Bosch 18V-200 Professional impact wrench. Always ensure the battery is removed before performing any maintenance, changing tools, or transporting the device to prevent accidental activation.
Device Description
The tool is designed for driving and loosening screws and bolts, as well as tightening and loosening nuts within the specified dimensions. It features a tool holder, rotational direction switch, and an integrated light for working in poorly lit areas.
Operation
To start, insert a charged battery into the handle until it engages. Use the rotational direction switch to select the desired direction (right for driving/tightening, left for loosening). Press and hold the on/off switch to operate the tool. The speed can be adjusted by varying the pressure on the switch.
Maintenance and Cleaning
Regularly clean the air vents to prevent dust accumulation, which can cause electrical hazards. Periodically clean the tool holder and locking sleeve. Always remove the battery before any maintenance work.
Safety
Always wear personal protective equipment, including eye protection. Hold the tool by insulated gripping surfaces when performing operations where the fastener may contact hidden wiring. Protect the battery from heat, fire, water, and moisture to avoid explosion and short-circuit risks.
Manufacturer information
Bosch
Practical help
Common problems
Tool does not start
Check if the battery is charged and correctly inserted. Ensure the rotational direction switch is not in the middle position.
Battery charge indicator does not light up
The battery may be defective and needs to be replaced.
Application tool falls out
Ensure the tool is securely connected to the tool holder. Some tools, like double bits, cannot be safely secured.
Before use
- Ensure the battery is fully charged.
- Check that the rotational direction switch is set correctly.
- Ensure the application tool is securely inserted into the tool holder.
- Wear appropriate personal protective equipment (eye protection, etc.).
- Ensure the work area is clean and well-lit.
Specs in practice
- Rated voltage
- 18V, requires compatible Bosch Li-ion batteries.
- No-load speed
- 0–3400 min-1, the rotational speed without load.
Model compatibility
- Compatible with all Bosch GBA 18V and ProCORE18V batteries.
- Use only chargers listed in the technical data.
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.