User Manual for Brilliant Greta II LED Vanity Light

Quick guide from the manual

This document provides installation and safety instructions for the Brilliant Greta II LED Vanity Light. Important: This fitting must be installed by a qualified electrical contractor in accordance with AS/NZS 3000:2007 and relevant amendments.

Installation Instructions

1. Ensure the mains supply is switched off before beginning any work.
2. Unpack the vanity light carefully.
3. Remove the mounting bracket from the rear of the vanity light.
4. Drill 2 holes in the mounting surface using the holes in the mounting bracket (B) as a guide.
5. Secure the bracket to the surface using screws and a suitable fixture system.
6. Connect the Live (L), Neutral (N), and Earth wires to the terminal block according to the markings.
7. Fit the vanity light (A) to the bracket (B) and fasten the two mounting screws.
8. Switch the mains supply on.
9. Switch on the light.

Safety Warnings

• Not designed for outdoor use.
• This fitting must be earthed.
• This product is not dimmable.
• Do not perform modifications or change parts within the light fixture.
• If the product functions irregularly, turn off the power and contact the nearest authorized dealer.

Specifications

• Fitting: Aluminium body with acrylic shade.
• Light source: 18746/11 (12W LED), 18747/11 (18W LED).
• Protection: Class I (requires earth connection).
• Voltage: 240V AC 50Hz.

Warranty

The product is covered by a 3-year warranty against defects in manufacture and workmanship from the date of purchase. The warranty is only valid if the product is installed by a qualified electrical contractor and operated within the specified guidelines. Proof of purchase and proof of installation may be required for claims.