Broan Nutone 1103228B Light Speaker Module
Quick guide for the Broan Nutone 1103228B Light Speaker Module. Learn how to connect via Bluetooth, safety warnings, and installation requirements.
Table of contents
Manual images
Click an image to enlargeQuick guide from the manual
The Broan Nutone 1103228B is an RGB+W LED light module with an integrated Bluetooth speaker. This device allows you to play music wirelessly through your phone. Before installation or maintenance, ensure the power is disconnected at the service entrance.

Function and Operation
The module operates on 120V/60Hz power. To use the Bluetooth speaker feature:
- Turn on the Bluetooth feature on your smartphone or mobile device.
- Search for available Bluetooth devices.
- Select FAN SPEAKAR from the list of available devices to connect.
- Once connected, open your preferred music player software on your phone to stream audio through the speaker.
Safety and Installation Warnings
Strict adherence to safety protocols is required for the installation and maintenance of this unit:

- Power Disconnection: Always disconnect power at the service entrance before performing any cleaning or servicing.
- Electrical Load: When installing, you must add the grille current to the fan current to determine the total current draw.
- Compatibility: This module must only be installed with models specifically indicated in the installation instructions.
Regulatory Information
This device complies with Part 15 of the FCC Rules and ISED Canada license-exempt RSS standards. Operation is subject to the following conditions:
- The device must not cause harmful interference.
- The device must accept any interference received, including interference that may cause undesired operation.
- Exposure Warning: This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.
Practical help
Common problems
Ensure the device is powered on and that your phone's Bluetooth feature is enabled and searching for new devices.
Ensure you are selecting the correct device name 'FAN SPEAKAR' from your phone's Bluetooth menu.
Before use
- Verify that the power is disconnected at the service entrance before starting installation.
- Confirm that the module is compatible with your specific fan model as per the installation instructions.
- Calculate the total current draw by adding the grille current to the fan current.
Specs in practice
- Voltage/Frequency
- 120V/60Hz - Ensure your home electrical supply matches these specifications.
- Minimum Distance
- 20 cm - Maintain this distance between the device and your body to comply with RF radiation exposure limits.
Model compatibility
- Must be installed only with models indicated in the installation instructions.
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.