Home Appliances / Vacuum Cleaners
Replacement Parts Kit for Eufy 11S Max Robot Vacuum
Quick guide for installing and maintaining the replacement parts kit for Eufy 11S Max, 15C Max, 30C Max, 39C Max, 35C Max, 15T, G10, and G30 series robot vacuums.
Table of contents
Manual images
Jump to the sectionQuick guide from the manual
This document provides instructions for the installation and maintenance of the replacement parts kit compatible with various Eufy RoboVac models. It covers the side brushes, main roller brush, high-efficiency filters, and the front caster wheel.
Side Brush
If the side brushes are bent due to shipping, place them in hot water for a few minutes, then remove and shake off the water to restore their shape.
Main Roller Brush
The main roller brush features thick, dense bristles and a rubber construction resistant to aging. Use tweezers to remove hair or debris wrapped around the brush.
High-Efficiency Filter
The H12 high-efficiency filter captures particles as small as 0.1 microns with up to 99.99% filtration capacity. Keep the filter clean to maintain optimal suction performance.
Premium & Durable Main Brush Cover
The kit includes a screwdriver to assist with the installation of the main brush cover. Use the provided cleaning brush to remove dust and dirt from the cover during maintenance.
Front Caster Wheel
The front caster wheel is designed for easy installation and replacement. Ensure it is properly seated in the robot vacuum chassis for smooth movement.
Manufacturer information
eufy
Practical help
Common problems
Side brushes are bent upon arrival
Place the side brushes in hot water for a few minutes, then remove and shake off the water.
Hair or debris tangled in the main roller brush
Use tweezers to carefully draw out the hair or debris from the brush.
Before use
- Verify compatibility with your specific Eufy RoboVac model (11S Max, 15C Max, 30C Max, 39C Max, 35C Max, 15T, G10, G30).
- Ensure the robot vacuum is powered off before replacing parts.
- Use the included screwdriver for the main brush cover installation.
- Check that the side brushes are not deformed; if they are, straighten them in hot water.
Specs in practice
- Main Roller Brush Length
- 165mm (6.5in) length, compatible with specified Eufy models.
Images and diagrams
- The kit includes multiple side brushes, two main roller brushes, a main brush cover, a front caster wheel, a cleaning tool, a screwdriver, and tweezers.
- The main brush cover installation requires the provided screwdriver.
- The front caster wheel snaps into the bottom of the robot vacuum.
Model compatibility
- Compatible with Eufy RoboVac 11S Max, 15C Max, 30C Max, 39C Max, 35C Max, 15T, G10, and G30 Edge/Verge Hybrid series.
Manual page author
Michael Turner
Technical manual editor
Reviews PDF manuals for structure, safety notes, and practical product details so readers can find the right information quickly.