Replacement Parts Kit Guide for Eufy RoboVac

Quick guide from the manual

This guide provides instructions for the maintenance and installation of replacement parts for Eufy RoboVac vacuum cleaners. The kit is compatible with the 11S Max, 15C Max, 30C Max, 39C Max, 35C Max, 15T, G10, G30 Edge, Verge, and HyBrid series. Ensure you have the included screwdriver and cleaning brush ready for maintenance tasks.

Side Brush Maintenance

Side brushes may become bent during shipping or regular use. To restore their shape:

• Place the side brushes in hot water for a few minutes.
• Remove them from the water.
• Shake off the excess water and allow them to dry before re-installation.

The brushes are made of wear-resistant nylon and durable PU material.

Main Roller Brush Maintenance

The main roller brush is designed with thick, dense bristles and a rubber construction resistant to aging. To maintain performance:

• Inspect the brush regularly for tangled hair or debris.
• Use tweezers to carefully draw out any hair wrapped around the brush.
• Ensure the brush head is properly aligned when re-inserting.

High-Efficiency Filter Care

The H12 high-efficiency filter captures tiny particles as small as 0.1 microns with up to 99.99% efficiency. To maintain filtration quality, clean the filter regularly using the provided cleaning brush to remove dust and dirt.

Main Brush Cover Installation

The main brush cover protects the roller brush. To install or replace:

• Use the included screwdriver to assist with the installation process.
• Clean any dust or dirt from the cover area using the cleaning brush before attaching the new cover.
• Ensure the cover is securely snapped into place.

Front Caster Wheel Replacement

The front caster wheel is designed for easy installation and replacement. Simply pull out the old wheel assembly and press the new one firmly into the slot until it is securely seated.