Clutch Kit User Guide for Fanatec CSL Pedals
Quick setup guide for the Fanatec CSL Pedals Clutch Kit. Learn how to install the clutch pedal, mount it to your existing CSL pedal base, and connect the cables correctly.
Table of contents
Quick guide from the manual
This document provides instructions for installing the Fanatec CSL Pedals Clutch Kit. It covers the physical mounting of the clutch pedal to the existing CSL pedal base and the correct cable connection procedure to ensure proper functionality.
Package Contents
- 1x CSL Pedals Clutch Kit
- 4x M4x12 mm Countersunk Mounting Bolts
- 1x T20 Torx Key
Installation
Mounting the Clutch Pedal:
- Position the clutch pedal unit (A) onto the pedal base.
- Secure the unit using the four provided M4x12 mm countersunk mounting bolts (B).
- Use the included T20 Torx key (C) to tighten the bolts securely.
Cable Routing and Connection
Connecting the Cables:
- Route the RJ12 cable through the cable buckets located under the heel rest to ensure it is secure and does not get pinched.
- Connect the cable to the port labeled Clutch on the pedal base. Ensure it is not connected to the Brake port.
Support
For further assistance, visit fanatec.com/support/faq. You can also download the Fanatec app or watch the video guide at Fanatec.com/QR/CSL-P-CK.
Official resources from the manual
Manufacturer information
Fanatec
Practical help
Common problems
Ensure the RJ12 cable is routed through the cable buckets under the heel rest.
Verify the cable is plugged into the 'Clutch' port, not the 'Brake' port.
Before use
- Verify all 4 mounting bolts are present
- Ensure you have the T20 Torx key
- Check that the pedal base is stable
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.