FMS 1500mm Cessna 182

Product Overview

The FMS 1500mm Cessna 182 is a high-performance, scale RC aircraft featuring durable EPO foam construction, functional flaps, and pre-installed LED navigation lights. It is designed for realistic flight characteristics and ease of assembly.

Technical Specifications

• Wingspan: 1500mm
• Overall Length: 1250mm
• Flying Weight: ~2000g
• Motor: 3541-KV840
• ESC: 40A
• Recommended Battery: 14.8V 2200mAh-3200mAh 25C

Safety Precautions

This model is not a toy and requires adult supervision for users under 14. Always operate in open areas away from people, traffic, and buildings. Handle Li-Po batteries with extreme caution, ensuring they are charged on heat-resistant surfaces and never left unattended. Always perform a range check before the first flight of each session.

Assembly

The model features a convenient snapper assembly structure. Key steps include: Tail wing installation by threading wires and securing the horizontal stabilizer; Fuselage installation using provided screws; Landing gear installation; and Main wing installation, which locks into place with a click mechanism. Ensure all control surfaces are in neutral positions before connecting linkage rods.

Pre-flight and Operation

Before flying, ensure the transmitter and receiver are bound. Perform a range check and verify all control surfaces move in the correct direction. The ESC includes a safe start feature; ensure the throttle is at the lowest position when connecting the battery. Use a timer to monitor flight duration to prevent unexpected power loss.

Maintenance and Troubleshooting

Regularly check that all screws are tightened and the propeller is secure. Repairs to the foam should be made using foam-safe adhesives. If the aircraft fails to respond or exhibits abnormal behavior, consult the troubleshooting section to check ESC arming, battery charge, and connection integrity.

ESC Programming

The included brushless ESC is programmable. Users can adjust settings such as brake type, motor timing, and low voltage cutoff thresholds using transmitter stick inputs or an optional programming card. Always follow the specific tone sequences to enter programming mode and save settings.