Lighting / Decorative Lighting
User Manual for GE Lighting 22028LO LED 350 Lights
Quick guide for GE Lighting 22028LO LED 350 Lights. Learn about safety precautions, proper installation on trees, maintenance, and storage instructions.
Quick answers from the manual
Quick answer
- The GE Lighting 22028LO is a set of 350 LED lights intended for indoor use. This manual provides essential safety precautions, installation guidelines for holiday trees, and maintenance instructions. p. 1
Key actions
- Inspect the product before every use for damage. p. 1
- Unplug the lights when leaving the house or sleeping. p. 1
Problems and fixes
Radio or TV interference
Reorient antenna, increase separation, or connect to a different circuit.
p. 1Show 2 more answers Show less
Maintenance and reset
- Store in a cool, dry location protected from sunlight when not in use. p. 1
Where to find it in the PDF
- Safety and Usage Instructions p. 1
Table of contents
Important Safety Information
This product is intended for indoor use only. It is not designed for permanent installation. To ensure safety, please observe the following precautions:
- Do not mount or place the lights near gas or electric heaters, fireplaces, candles, or other heat sources.
- Do not secure the wiring with staples or nails, and do not place the wiring on sharp hooks or nails.
- Do not let lamps rest on the supply cord or any wire.
- Unplug the product when leaving the house, retiring for the night, or if left unattended.
- This is an electric product, not a toy. Keep out of reach of small children.
- Do not close doors or windows on the product or extension cords to avoid damaging wire insulation.
- Do not cover the product with cloth, paper, or any material not part of the product when in use.
Installation on Trees
If you are using these lights on a live tree, follow these guidelines:
- Ensure the tree is well-maintained and fresh. Do not use on trees where needles are brown or break off easily.
- Keep the tree holder filled with water.
- Ensure the tree is well-secured and stable.
Maintenance and Storage
Proper care extends the life of your product:
- Inspection: Before using or reusing, inspect the product carefully. Discard any product that has cut, damaged, or frayed wire insulation, cracks in the lampholders or enclosures, loose connections, or exposed copper wire.
- Storage: When not in use, remove the product carefully from trees or bushes to avoid strain on conductors and wires. Store the product neatly in a cool, dry location protected from sunlight.
Regulatory Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that the device does not cause harmful interference and must accept any interference received. If you experience interference with radio or television reception, try reorienting the antenna, increasing the separation between the equipment and the receiver, or connecting the equipment to a different circuit.
Practical help
Common problems
Damaged wires, frayed insulation, or loose connections
Discard the product immediately; do not attempt to use.
Radio or TV interference
Reorient or relocate the receiving antenna, increase separation between equipment and receiver, or connect to a different circuit.
Before use
- Inspect the product for cut, damaged, or frayed wire insulation.
- Check for cracks in the lampholders or enclosures.
- Ensure there are no loose connections or exposed copper wire.
- Verify the tree is fresh and well-watered if installing on a live tree.
- Ensure the tree is stable and secure.
Show more Show less
Specs in practice
- 350 LED Lights
- The total count of light bulbs included in the string.
- Indoor Use Only
- The product is not rated for outdoor weather conditions.
Model compatibility
- Indoor use only.
- Not intended for permanent installation.
Manual page author
David Miller
Documentation analyst