Lighting / Decorative Lighting
User Manual for GE Lighting 21L Jewel Star 71026
Quick guide for the GE Lighting 21L Jewel Star (Model 71026). Includes safety instructions, bulb and fuse replacement procedures, and care tips for your decorative lighting.
Quick answers from the manual
Quick answer
- This guide covers safety, maintenance, and repair for the GE 21L Jewel Star light string, including fuse and bulb replacement steps. p. 1
Key actions
- Replace fuse p. 1
- Replace bulb p. 1
Problems and fixes
Fuse blows
Unplug the product. Replace fuse with 3 Amp, 125 Volt fuse.
p. 1Show 3 more answers Show less
Maintenance and reset
- Store in a cool, dry location protected from sunlight when not in use. p. 1
Technical specifications
| Parameter | Value | Meaning | Pages |
|---|---|---|---|
| Rating | 16.8 Watts (0.14 Amps) | Maximum power consumption | p. 1 |
| Bulb | 6 Volt, 0.84 Watt | Replacement bulb specification | p. 1 |
Where to find it in the PDF
- Safety and Servicing p. 1
Table of contents
Manual images
Click an image to enlargeQuick Guide from the Manual
This guide provides essential safety, maintenance, and repair instructions for the GE 21L Jewel Star light string. Always ensure the set is unplugged before performing any maintenance or troubleshooting.
Safety Instructions
- Indoor Use Only: This product is for indoor use unless marked otherwise.
- Heat Sources: Do not mount or place near gas or electric heaters, fireplaces, candles, or other heat sources.
- Wiring: Do not secure wiring with staples or nails. Do not hang ornaments from the cord or light string.
- Overload Protection: The product features a fuse for overload protection. If the fuse blows, unplug the product immediately.
- Tree Safety: If used on a tree, ensure the tree is fresh, well-maintained, and stable. Keep the tree holder filled with water.
User Servicing Instructions
Fuse Replacement
Fuses often blow due to connecting too many sets end-to-end.
- Unplug the set from the outlet.
- Use a flathead screwdriver to open the fuse access cover on top of the attachment plug.
- Remove the blown fuses carefully.
- Replace with a 3 Amp, 125 Volt fuse (provided with the product).
- Slide the fuse cover closed, ensuring it is fully closed and the fuses are covered.
Bulb Replacement
Ensure the set is unplugged before replacing bulbs.
- Grasp the plug and remove it from the outlet.
- Hold the bulb by the plastic base and pull it straight out of the socket. Do not twist the bulb.
- Replace with a new 6 Volt, 0.84 Watt super brightness midget push-in type lamp.
- Align the bulb leads into the holes in the plastic base and push the assembly into the socket.
Care and Storage
Before storing, carefully remove the product from trees, branches, or bushes to avoid strain on the conductors. Store in a cool, dry location protected from sunlight when not in use.
Technical Specifications
- Rating: 16.8 Watts (0.14 Amps)
- Replacement Bulb: 6 Volt, 0.84 Watt
- Replacement Fuse: 3 Amp, 125 Volt
For assistance, contact customer service at 1-877-398-7337 or visit www.GEholidaylighting.com.
Official resources from the manual
Practical help
Common problems
Set will not light
Check if bulbs are twisted or loose; ensure the fuse is not blown.
Fuse blown
Often caused by connecting too many sets end-to-end. Replace with a 3 Amp, 125 Volt fuse.
Before use
- Inspect for cut, damaged, or frayed wire insulation.
- Check for cracks in lamp holders or enclosures.
- Ensure no loose connections or exposed copper wire.
- If using on a tree, ensure the tree is well-maintained, fresh, and stable.
Show more Show less
Specs in practice
- Replacement Bulb
- 6 Volt, 0.84 Watt super brightness midget push-in type.
- Replacement Fuse
- 3 Amp, 125 Volt.
Images and diagrams
- Fuse replacement: Slide open the fuse access cover on the plug.
- Bulb replacement: Pull bulb/base straight out; do not twist.
Model compatibility
- For indoor use only.
- Do not install on trees with metal needles, leaves, or branch coverings.
Manual page author
Michael Turner
Technical manual editor