Assembly Instructions for Globo Lighting 21914A / 21914B Table Lamp
Quick assembly guide for the Globo Lighting 21914A and 21914B table lamps. Includes step-by-step installation instructions, bulb requirements, and technical specifications for this touch-controlled lamp.
Quick answers from the manual
Quick answer
- The Globo Lighting 21914A/21914B is a touch-controlled table lamp. Assembly involves attaching the socket to the base, installing an E14 bulb (max 25W), and securing the shade with the top cap. p. 1
Key actions
- Assemble the lamp by attaching the socket, bulb, shade, and top cap in the numbered sequence. p. 1
First start
- Plug the lamp into a 230V outlet and touch the base to turn it on. p. 1
Show 2 more answers Show less
Technical specifications
| Parameter | Value | Meaning | Pages |
|---|---|---|---|
| Bulb Type | E14 | Socket type | p. 1 |
| Max Wattage | 25W | Maximum power rating | p. 1 |
| Voltage | 230V~ 50Hz | Power requirements | p. 1 |
Where to find it in the PDF
- Assembly Diagram p. 1
Table of contents
Quick guide from the manual
This document provides assembly instructions for the Globo Lighting 21914A and 21914B table lamps. The lamp features a touch-sensitive on/off control located on the base. Ensure you use a light bulb with a maximum power of 25W and an E14 base.
Assembly instructions
- Base Preparation: Ensure the base unit is ready for assembly.
- Secure Socket: Attach the socket assembly to the base and tighten it securely.
- Install Bulb: Screw in the E14 light bulb (Max 25W).
- Position Shade: Place the lamp shade onto the socket assembly.
- Secure Shade: Ensure the shade is properly aligned and seated.
- Final Assembly: Attach the top finial or cap to secure the shade in place.
Usage
The lamp is operated via a touch sensor located on the base. Simply touch the base to turn the light on or off.
Technical specifications
- Bulb Base: E14
- Maximum Wattage: 25W
- Voltage: 230V~ 50Hz
Manufacturer information
Globo Lighting
Practical help
Common problems
Check if the bulb is screwed in correctly and ensure the power supply is connected. Verify the touch sensor area on the base is clean and dry.
Before use
- Ensure the power supply is 230V~ 50Hz.
- Use a bulb with a maximum of 25W (E14 base).
- Ensure the lamp is placed on a stable, flat surface.
- Verify all assembly parts are tightened securely.
Manual page author
David Miller
Documentation analyst