Globo 15648W3 Wall Light Installation Guide

Product Overview

The Globo 15648W3 is a stylish wall-mounted lighting fixture designed for indoor use. This manual covers two distinct installation configurations, referred to as Version A and Version B, to ensure compatibility with different mounting requirements.

Safety Instructions

Important: Before starting any installation work, always ensure that the main power supply is switched off at the circuit breaker. Failure to disconnect the power can result in electric shock or injury. Ensure that all electrical connections are made by a qualified professional if you are not experienced with electrical wiring.

Installation and Setup

The installation process varies slightly depending on the version of the product you have:

• Version A: This version is designed for direct wall mounting. Follow the numbered steps in the diagram to secure the mounting plate to the wall, connect the electrical wires to the terminal block, and attach the lamp shade and bulb.
• Version B: This version includes additional mounting points and a plug-in power option. Ensure the wall bracket is securely fastened using the provided screws and anchors. Connect the wiring according to the diagram, ensuring the neutral and live wires are correctly seated in the terminal block.

Maintenance and Bulb Replacement

To maintain the appearance of your wall light, clean the metal surfaces with a soft, dry cloth. Do not use abrasive cleaners or chemicals. When replacing the light bulb, ensure the power is turned off and the bulb has cooled down completely. Unscrew the old bulb and replace it with a new one of the same type and wattage as specified on the product label.

Troubleshooting

If the light fails to turn on, first check that the power supply is active at the circuit breaker. Verify that the bulb is screwed in correctly and is not burnt out. If the issue persists, inspect the wiring connections at the terminal block to ensure they are secure and properly seated.