GLOBO 15945H Pendant Light Installation and Usage Guide

Product Overview

The GLOBO 15945H is a stylish pendant light fixture designed for indoor use. It is engineered to provide reliable illumination while serving as a decorative element in your living space. The unit is compatible with standard E27 bulbs up to a maximum of 40W.

Technical Specifications

• Model: 15945H
• Voltage: 230V ~ 50Hz
• Socket Type: E27
• Maximum Wattage: 40W

Safety Instructions

Before beginning any installation work, it is critical to ensure that the power supply is completely disconnected. Switch off the circuit breaker or remove the fuse to prevent accidental electrical shock. Installation should be performed by a qualified individual in accordance with local electrical regulations.

Installation Steps

Follow these steps to ensure a secure and proper installation:

• Ensure the power is turned off at the main distribution board.
• Mount the ceiling bracket securely to the ceiling surface using appropriate hardware.
• Connect the electrical wires from the ceiling to the terminal block on the fixture, ensuring that the Live (L), Neutral (N), and Earth (ground) wires are matched correctly.
• Attach the fixture canopy to the ceiling bracket.
• Adjust the cable length if necessary to achieve the desired hanging height.
• Install the glass shade and secure it according to the design.
• Insert the E27 bulb into the socket.
• Once installation is complete, restore power at the circuit breaker.

Maintenance and Care

To keep your pendant light in optimal condition, clean the fixture regularly with a soft, dry cloth. Avoid using abrasive cleaners or chemicals that could damage the finish. Always ensure the light is turned off and has cooled down completely before cleaning or replacing the bulb. If the light fails to operate, check the bulb connection and the circuit breaker status.

Disposal

When the product reaches the end of its service life, please dispose of it in accordance with local environmental regulations. Do not discard electrical components in standard household waste; utilize designated recycling facilities for electronic equipment.