Goldair 1500W Micathermic Heater

Product Overview

The Goldair 1500W Micathermic Heater (Model GMH210) is designed for efficient indoor household heating. It features adjustable heat settings and built-in safety mechanisms to ensure reliable performance.

Safety Information

• Do not cover: Covering the heater poses a severe fire risk and will permanently disable the unit.
• Clearance: Maintain a minimum distance of 1 metre from the front, sides, and rear of the appliance to all flammable materials, including curtains and furniture.
• Usage: For indoor household use only. Do not use in small rooms occupied by persons unable to leave without assistance, unless supervised.
• Placement: Always operate on a flat, stable, heat-resistant surface. Never use in bathrooms, near swimming pools, or in areas where flammable liquids are stored.
• Supervision: Keep children away from the appliance.

Assembly

The heater must be assembled with the provided feet and castors before use. Use the supplied '1-way screws' for permanent installation. Turn the main body upside down on a scratch-free surface, align the feet with the base holes, and secure firmly with a screwdriver. Never operate the heater without the wheel assemblies attached.

Operation

Ensure the heat control switch is in the 'Off' position before plugging into the mains. The heater offers two heat settings: Low (I) and High (II). For optimal comfort, set the thermostat to maximum, then slowly turn it anti-clockwise once the room reaches the desired temperature until you hear a click. The heater will then cycle on and off to maintain that temperature.

Safety Devices

• Tilt Switch: Automatically turns the unit off if it is not in an upright position.
• Resettable Thermal Link: Disconnects power if the unit overheats; it will reset automatically after cooling.
• Thermal Fuse: A non-resettable fuse that permanently disables the unit in case of extreme overheating.

Maintenance and Care

Regular cleaning is essential for safe operation. Always unplug the unit and allow it to cool completely before cleaning. Use a vacuum cleaner to remove dust and fluff from air vents and grills. Wipe the exterior with a damp cloth only. Do not use abrasive cleaners, petrol, or thinners. There are no user-serviceable parts inside; contact an authorized technician for repairs.