Furniture / Home Furnishing
Holiday Living 4124147 6-Foot Animated Santa User Guide
Quick setup and operation guide for the Holiday Living 6-Foot Animated Santa. Includes assembly steps, sensor settings, troubleshooting, and care instructions.
Table of contents
Quick guide from the manual
This document provides assembly and operation instructions for the 6-Foot Animated Santa. The product is for indoor use only and is intended for decoration. Assembly takes approximately 15 minutes and requires no tools. Ensure all parts are present before starting assembly.
Assembly Instructions
Follow these steps to assemble the figure:
- Connect the lower support poles to the base, ensuring the locking pins click into place.
- Slide the boots onto the poles, followed by the pants.
- Attach the hip frame to the support poles and secure the hip hoop.
- Pull the pants up and secure them onto the hip hoop.
- Connect the body frame to the hip frame.
- Slide the costume over the body frame and secure the sensor using the hook and loop closure.
- Attach the left arm and left hand to the body frame using the provided hook housings.
- Attach the right arm to the body frame.
- Secure the head to the top of the body frame and connect the wire from the head to the function control box.
- Zip up the back of the costume.
- Secure the right hand and gift sack to the costume and attach them to the right arm.
Operation Instructions
Plug the power adapter into a standard outlet. The function control box on the body frame allows for the following settings:
- Sensor: Activates sound and animation when the infrared sensor detects motion within a 2-meter (6.5 ft) range and an 80-degree angle.
- Try Me: Allows activation only when an optional Step Activation Pad is used.
- Continuous: Operates sound and animation continuously.
- Volume: Use the dial to adjust or turn off the sound.
Safety and Maintenance
This item is not a toy. Keep away from children and open flames. Do not climb on or tilt the product. For cleaning, use a soft, clean cloth; do not wash, bleach, iron, or dry clean. Store in a cool, dry place away from sunlight when not in use.
Technical Data
Input: 100-240V AC 50/60Hz. Output: 5.9V DC 1.5A.
Practical help
Common problems
Item is not functioning.
Ensure the adapter is plugged into both the wall outlet and the function control box.
Sensor is not working.
Ensure the sensor is facing forward and nothing is obstructing it.
Movement is jerky or noisy.
Check if the costume or other objects are obstructing the moving parts.
Item is wobbling.
Ensure the item is placed on a hard, flat, and level surface.
Before use
- Remove all parts from the box and verify against the package contents list.
- Use a carpeted or scratch-free surface for assembly.
- Do not use power tools to avoid damaging fasteners.
- Ensure all wires are connected according to their matching colors.
- Verify the sensor is not blocked before operation.
Specs in practice
- Sensor Range
- Up to 2 meters (6.5 ft) at an 80-degree angle.
Model compatibility
- For indoor use only.
- Optional Step Activation Pad (not included) can be used via the 'Try Me' jack.
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.