Documents / Warranty Safety
StarTech.com 10070H-ST: 1Gbps RJ45 to Copper SFP Transceiver
A high-performance 1000BASE-T copper SFP transceiver module compatible with Extreme Networks 10070H, offering reliable 1Gbps connectivity up to 100m.
Table of contents
Product Overview
The StarTech.com 10070H-ST is a high-quality copper SFP transceiver module designed to be fully compatible with the Extreme Networks 10070H. This module is engineered, programmed, and tested to work seamlessly with Extreme Networks switches and routers, ensuring stable and reliable 1GbE network performance. It supports 1000BASE-T standards and provides a robust connection over copper cabling for distances up to 100 meters.
Key Features and Performance
This SFP module is built for demanding enterprise and data center environments. It features hot-swappable functionality, allowing for seamless upgrades and replacements without interrupting network operations. The module supports Digital Diagnostics Monitoring (DDM), which provides real-time information about the transceiver's status, such as optical power, temperature, and voltage, helping IT professionals maintain network health.
The 10070H-ST is not only compatible with Extreme Networks hardware but also works with MSA-compliant switches from various manufacturers, including Ubiquiti, D-Link, Netgear, Supermicro, and TP-Link, provided they support uncoded modules. With a maximum data transfer rate of 1.25 Gbps and full-duplex operation, it ensures efficient data transmission for your network infrastructure.
Technical Specifications
The module is designed for durability and long-term use, boasting an impressive Mean Time Between Failures (MTBF) of over 510 million hours. Its compact physical design makes it easy to install in standard SFP slots. The device operates with low power consumption, contributing to energy efficiency in large-scale deployments.
- Data Rate: Up to 1.25 Gbps
- Connector: RJ-45
- Max Distance: 100 meters
- Compatibility: Extreme Networks 10070H and MSA-compliant switches
- Hot-Swappable: Yes
- DDM Support: Yes
Installation and Maintenance
Installation is straightforward due to the hot-swappable nature of the SFP module. Simply insert the module into an available SFP slot on your network switch or router. Once inserted, connect your copper network cable to the RJ-45 port. No complex configuration is typically required, as the module is designed to be plug-and-play. For maintenance, ensure the RJ-45 connector is clean and free of debris to maintain optimal signal integrity. The product is backed by a lifetime warranty, reflecting StarTech.com's commitment to quality and long-term reliability in professional networking environments.
Official resources from the manual
Practical help
Common problems
Module not recognized by switch
Ensure the switch port supports 1000BASE-T and that the module is fully seated in the SFP slot. Check if the switch requires specific configuration for third-party transceivers.
Intermittent connectivity
Verify the quality of the copper cable and ensure it does not exceed the 100m maximum distance limit.
Before use
- Verify that your switch or router supports 1000BASE-T SFP modules.
- Ensure the SFP slot is clean and free of dust.
- Check that the copper network cable is Cat5e or higher for 1Gbps performance.
- Confirm the device is compatible with the specific switch model.
Specs in practice
- Hot-swappable
- The ability to replace the module without powering down the network device.
Model compatibility
- Compatible with Extreme Networks 10070H.
- Works with MSA-compliant switches (e.g., Ubiquiti, D-Link, Netgear, Supermicro, TP-Link) that support uncoded modules.
Manual page author
David Miller
Documentation analyst
Organizes user manual content into clear summaries, with attention to model details, product context, and everyday usability.