Tefal Instant Hot Water Dispenser

Product Overview

The Tefal Instant Hot Water Dispenser provides instant hot water at selectable temperatures (70°C to 95°C) and volumes (150ml to 500ml). It features a child lock, low water level detection, and a descaling reminder system to ensure longevity and safety.

Getting Started

• Plug in the device (Fig 1).
• Fill the water tank with drinking water (max 2L, optimal temperature 15-25°C) (Fig 2).
• Press the ON/OFF button for 3 seconds to start.
• The device locks automatically after 1 minute of inactivity. To unlock, press the ON/OFF button for 3 seconds.

Operation

• Adjust the drip tray and place a cup (Fig 4).
• Select the desired temperature and volume (Fig 5).
• Press the Serve button to start dispensing (Fig 6).
• The device will stop automatically or can be stopped manually by pressing the Serve button again.

Cleaning and Maintenance

Rinsing: If the device is unused for 48 hours or unplugged, the cleaning icon will illuminate. Hold the Serve button for 3 seconds to initiate a 250ml hot water rinse cycle.

Descaling: Descaling is mandatory after 200 cycles. The descaling icon will blink after 185 cycles. To descale, dilute 40g of citric acid in 1L of warm water (max 40°C) and pour into the tank. Press the descaling button for 3 seconds to start the process. Follow with 3 rinsing cycles using fresh water.

Safety

Never immerse the appliance, cord, or plug in water. Always unplug the device before cleaning. Do not use abrasive scouring pads. Ensure the water level is above the 0.6L minimum before starting any cycle.