Topmaq 13-51mm Manual Pipe Bender Parts List
Access the official parts list and exploded view diagrams for the Topmaq 13-51mm manual pipe bender. Essential for identifying components, assembly, and maintenance.
Table of contents
Parts List and Assembly Overview
This document provides a comprehensive parts list and exploded view diagrams for the Topmaq 13-51mm manual pipe bender. Use these diagrams to identify components during assembly, maintenance, or when sourcing replacement parts.
Main Assembly Components
Figure 1 illustrates the main frame and bending mechanism assembly. Key components include:
- Upper and lower wing plates (Items 01, 08)
- Swage block (Item 02)
- Bending die (Item 06)
- Pump unit (Item 07)
- Fasteners and pins (Items 03, 04, 05, 10, 11, 12)
Pump Unit Details
Figure 2 provides a detailed breakdown of the hydraulic pump unit. This section is critical for internal maintenance and seal replacement. Key components include:
- Pump housing and oil tank (Items 01, 28, 30)
- Pistons and plunger housing (Items 35, 41, 42, 43)
- Seals and O-rings (Items 04, 08, 44, 45, 50)
- Release knob and valves (Items 06, 11)
- Springs and seats (Items 10, 12, 13, 17)
Practical help
Common problems
Inspect O-rings (items 04, 08, 44, 50) and seals for wear, damage, or improper seating.
Check steel balls (02, 09) and internal springs for proper seating and function within the pump housing.
Before use
- Verify all parts listed in Figure 1 and Figure 2 are present.
- Ensure all fasteners are tightened securely before applying pressure.
- Check that the release knob is functioning correctly.
- Inspect hydraulic seals for any signs of damage or degradation.
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.