User Manual for Trinity Barnwood Mirror 11x14MIR-NAT

Quick guide from the manual

This manual provides instructions for installing the Trinity Barnwood Mirror. Before beginning, ensure you have all parts and the necessary tools. The installation process involves marking the wall, leveling, drilling pilot holes, installing anchors, and hanging the mirror.

Parts List

• A: Mirror (1)
• B: Screw (2)
• C: Drywall Anchor (2)

Required Tools (Not included): Pencil, level, drill, 1/4-inch bit, and Phillips bit.

Assembly Installation

1. Mark Height: Place the mirror against the wall and mark the top of the mirror at your desired height. Note that the mounting screw height will be 1-inch lower than the marked mirror height.
2. Leveling: Position a level 1-inch lower than the desired mirror height marked in Step 1. Use a pencil to mark a leveled horizontal line for the mounting screw height.
3. Spacing: On the mounting screw height line, mark 2 points 10 1/2-inches apart, corresponding to the spacing of the keyholes on the back of the mirror.
4. Drilling: Using a 1/4-inch drill bit, drill 2 pilot holes into the wall through the marked points. Screw the drywall anchors (C) into the pilot holes with a Phillips bit until they are flush with the wall.
5. Install Screws: Insert screws (B) into the drywall anchors (C) using a drill with a Phillips bit. Leave the screw head 1/4-inch exposed to allow room to hang the mirror.
6. Hang Mirror: Slide the mirror (A) over the screws until they insert into the keyholes. Lower the mirror onto the screws until it locks into place.

Care and Maintenance

• Avoid harsh, abrasive cleaners and corrosive chemicals.
• Do not use scouring pads for cleaning.
• Clean with a damp cloth and/or mild dish soap.
• Dry completely with a dry sponge or cloth.

Warnings

• Read and understand all instructions before use.
• Do not modify the product in any way; unauthorized modifications void the warranty.
• Check for damaged parts before use.
• Do not overload the product.

Warranty and Support

This product includes a 1-year limited warranty. For assistance, missing parts, or questions, contact Trinity Customer Service at 800.985.5506 or email [email protected]. Support is available Monday through Friday, 5:00 AM – 5:00 PM (PST).