Installation Guide for TRIO Garonne Garden Post 401860130
Quick installation guide for the TRIO Garonne garden post (401860130). Includes safety warnings, step-by-step mounting instructions, and technical specifications.
Quick answers from the manual
Quick answer
- The TRIO Garonne garden post (401860130) is an outdoor light fixture requiring a 230V power supply and an E27 bulb (max 60W). Installation involves securing the base to the ground, connecting the electrical wires, and attaching the housing. p. 2
Key actions
- Turn off the power supply at the circuit breaker before starting installation. p. 2
Problems and fixes
Check the circuit breaker and ensure the bulb is correctly installed.
p. 2Technical specifications
| Parameter | Value | Meaning | Pages |
|---|---|---|---|
| Voltage | 230V ~ 50Hz | Standard mains voltage | p. 2 |
| Socket | E27 | Standard screw base | p. 2 |
| Max Power | 60W | Maximum wattage for the bulb | p. 2 |
Where to find it in the PDF
- Safety Warnings p. 1
- Installation Instructions p. 2
Table of contents
Manual images
Click an image to enlargeImportant Safety Information
Before beginning any installation work, it is critical to switch off the power supply at the main circuit breaker to prevent the risk of electric shock. Ensure that the installation is performed by a qualified person if you are unsure about electrical wiring.
Installation Steps
- Power Off: Ensure the main power supply is switched off at the circuit breaker.
- Preparation: Prepare the mounting surface.
- Mounting: Secure the base of the garden post to the ground using appropriate screws and anchors.
- Wiring: Connect the electrical supply wires to the terminal block inside the housing, ensuring correct connection of Live (L), Neutral (N), and Earth (Ground).
- Assembly: Attach the main housing of the light fixture to the base.
- Securing: Fasten the housing securely using the provided screws.
- Power On: Once fully assembled, switch the power supply back on at the circuit breaker.
Technical Specifications
- Voltage: 230V ~ 50Hz
- Socket Type: 1 x E27
- Maximum Wattage: 60W
- Protection Rating: IP44 (Protected against solid objects over 1mm and splashing water)
Practical help
Common problems
Verify that the power supply is switched on at the circuit breaker and ensure the light bulb is properly screwed into the E27 socket.
Before use
- Ensure the power supply is switched off at the circuit breaker.
- Verify that the mounting surface is stable and suitable for the fixture.
- Check that the light bulb used does not exceed the maximum 60W rating.
- Ensure all electrical connections are secure and correctly wired.
Manual page author
David Miller
Documentation analyst
Organizes user manual content into clear summaries, with attention to model details, product context, and everyday usability.