User Manual for Adler Europe AD 1352 Electric Kettle

Quick guide from the manual

This electric kettle is designed for boiling clean water for domestic use. Before first use, fill the kettle to the MAX level, boil, and discard the water three times to remove any factory odors. Always ensure the kettle is placed on a stable, flat, and heat-resistant surface.

Device description

• 1. Kettle casing
• 2. On/off switch
• 3. Indicator light
• 4. Rotating base
• 5. Lid
• 6. Handle
• 7. Cover opening button
• 8. Mesh filter

Operation

1. Fill the kettle with water, ensuring the heating element is completely covered.
2. Place the base on a stable, flat, and heat-resistant surface.
3. Plug the power cord into a 220-240V~50-60Hz outlet and press the switch. The indicator light will turn on.
4. The kettle will turn off automatically once the water boils.
5. To turn off the kettle before boiling, press the switch.
6. Ensure the lid is closed during boiling for the automatic switch-off function to work.

Cleaning and maintenance

Regularly remove limescale from inside the kettle using designated descaling agents. Failure to descale regularly will damage the kettle and void the warranty. After descaling, rinse the kettle thoroughly three times. The mesh filter (8) can be removed and rinsed under running water as needed.

Safety instructions

• For home use only.
• Do not use the kettle without water.
• Always unplug the device after use by holding the plug, not pulling the cord.
• Do not immerse the kettle, base, or cord in water.
• Keep out of reach of children. Children aged 3 to 8 may only operate the device under supervision.
• Do not use if the housing is cracked.
• Do not open the lid while the water is boiling.

Technical data

• Maximum capacity: 1.7 L
• Minimum capacity: 0.5 L
• Voltage: 220-240V ~ 50-60Hz
• Power: 2000-2400W