Tools / Power Tools
Bosch GDS Professional 18V-750 C Cordless Impact Wrench User Guide
Quick guide for the Bosch GDS Professional 18V-750 C cordless impact wrench, covering setup, operation, speed settings, Bluetooth connectivity, and maintenance.
Table of contents
Quick guide from the manual
The Bosch GDS Professional 18V-750 C is a cordless impact wrench designed for driving and loosening screws and bolts, as well as tightening and loosening nuts. It features Bluetooth connectivity for data transfer and settings adjustment via the Bosch PRO360 app.
Device Description
The tool features a tool holder (1), a rotational direction switch (2), a Bluetooth module cover (3), a belt clip (4), a battery release button (6), a user interface (7), an on/off switch (8), and an insulated handle (9). The user interface (7) allows for speed preselection, working mode selection, and status indication.
Operation
To operate, insert a charged battery until it clicks. Use the rotational direction switch (2) to change direction. The speed/impact rate is controlled by the pressure applied to the on/off switch (8). The tool features three speed settings (800, 1500, 2400 min-1) and three impact settings (1500, 2300, 3000 min-1).
Working Modes and Bluetooth
The tool has two preset working modes (A and B) which can be customized via the Bosch PRO360 app. The app also allows for status checks, warning messages, and enabling the 'Secure Socket Release' function, which helps prevent socket jamming by briefly reversing the rotation direction.
Maintenance and Cleaning
Regularly clean the air vents to prevent dust accumulation. Always remove the battery before performing any maintenance or tool changes to prevent accidental startup.
Safety
Always wear personal protective equipment, including eye protection. Keep the work area clean and well-lit. Do not use the tool in explosive atmospheres. Ensure the tool is switched off before placing it down.
Manufacturer information
Bosch
Practical help
Common problems
Tool does not start
Check if the battery is charged and correctly inserted.
Socket jams during operation
Activate the 'Secure Socket Release' function via the Bosch PRO360 app.
Tool overheats
Switch off the tool and allow it to cool down.
Before use
- Ensure the battery is fully charged.
- Check that the correct impact-resistant bit or socket is securely attached to the tool holder.
- Verify the rotational direction switch is in the desired position.
- Ensure the work area is clear of bystanders and hazards.
Specs in practice
- Max. tightening torque
- 750 Nm, the maximum force the tool can apply for tightening.
- Max. loosening torque
- 1000 Nm, the maximum force the tool can apply for loosening.
- No-load speed
- The rotational speed without any load, adjustable in three settings.
Model compatibility
- Compatible with all Bosch Professional 18V batteries (GBA 18V and ProCORE18V).
- Bluetooth connectivity requires a mobile device compatible with Bluetooth Low Energy (version 4.1) and the Bosch PRO360 app.
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.